|
[China]
Trade Verify
Address: Rm. 704, No. 30, Binglang Dongli, Siming District, Xiamen, China
Contact name:Chen Junjie
Xiamen Comwinning Imp.&Exp.Co.,Ltd |
|
Verified Suppliers
|
|
|
Material And Passenger Lift SC320/320 For Construction Site And Plants Max 450M
Passenger and Material Construction Elevator Introduction
Construction lifter is mainly used to transport workers and materials to multistoried building.
The Construction lifter has advantages, such as steady satety, reliability, flexible and good adaptability, etc.
It improves work efficiency and reduces work intensity.
Our Material Elevator Features and Advantages
* The modular and standardizing system makes our construction
elevators be flexible, efficient, safe, productive, low energy
consumptive and ownership cost.
* The passenger and material hoist runs stably and smoothly,
and starts and stops without surging or jerking.
* The passenger and materail elevator is reliable with very little
breakdown and is durable with very long work-life.
* The helical gearboxes which made specially for rack and
pinion elevators, are extremely strong, reliable and durable.
* The integrated elevator car roof, which made by a steel plate
with edges fully welded, enhance hoist cage strength and ensure no
leakage.
* Easy access to electrical panels of elevator for maintenance.
* Full set of certified safety braking system of rack and pinion
hoist.
* The material elevator car frame is enlarged and strengthened.
Certificate
TUV proved according to European Regulation EN 12159:2012, EN
60204-1:2006/A1:2009.
Technical Data
| Item & Article No. | SC320, KP-B17; SC320/320, KP-B18 |
| Payload Capacity | 3.2 Ton per Cage |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 450 m |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | Flap type as a ramp is available |
| Motor Control | FC (Frequency Control) |
| Engine Power | 3x15 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Type of Mast | Square Column 650*650 mm with Bolted Rack |
| Length Mast Section | 1.508 m |
| Rack Module | 8 |
