SIWAY Acrylic silicone adhesive sealant construction material
Products Description
Product Name
SV-101 High performance acrylic silicone Sealant
Density [g/ml]
0.96±0.02
Skin formation time [min]
20
Tack Free [min]
≤60
Curing rate [mm/24h]
1-1.5
Curing time(hour)
≤48
Cured - tested after 4 weeks at 23℃ and 50% RH
Value
Elongation at break [%]
≥100
Elastic recovery [%]
15-25
Shore A hardness
15-25
Temperature resistance [℃ ]
-10 to 80
SIWAY High perfomance acrylic silicone Sealant
Acrylic Silicone Sealant is a high performance sealant suitable for
sealing, bonding, repairing and mending of glass and window construction, double glazing in windows,
aquariums, shower screens and sanitary ceramics.
SIWAY High perfomance acrylic silicone Sealant
SIWAY High performance acrylic silicone Sealant exhibits an
excellent adhesion to glass tiles ceramics, fibreglass, aluminum,
no-oily woods, painted surfaces, plastics and other non-porous surfaces.
Products Features
Characteristic
Acrylic Silicone Sealant
1. One-part, high flexibility, acrylic cure suitable for use on
most construction materials.
2. Excellent adhesion to most construction materials without
primer.
3.High Modulus after cured, extension/compression movement
capability of up to ±25% of the original joint width.
Netural/ Waterproof Silicone Sealant
1.use and extrude easily in the application of sealing, assembling,
waterproofing hardware products, and hardware products, and have long-term durability.
2.One-part, medial modulus, neutral cure, ultra clear, and
non-corrosive to sensitive substrates.
3.Excellent adhesion to stone, ceramics, concrete, and other
building materials.
4.No pollution to porous materials.
Directions for use 1. Ensure all surfaces are clean, dry ad grease-free. Remove all
grit, oil, grease, detergents, flaking paint, any loose materials and old sealant. 2. Cut off tip of nozzle and cartridge. Screw on nozzle to
cartridge. 3. Fit into chalking gun, applyn surface in steady flow. 4. If required smooth and shape sealant with spatula dipped in mild
detergent. 5. Remove excess uncured sealant with a mineral turpentine soaked
cloth. Fully cured excess sealant an be removed by trimming with a sharp knife.
Warning!
Ensure good ventilation if used indoors. Contact of unvulcanized silicone sealant with eyes and mucous
membranes must be avoided as this will cause irritation. Prolonged contact with eyes, flush with water and consult physician
if necessary. Keep out of reach of children.
Applications
Application Tips
To obtain a smooth and neat finish, apply masking tape and remove
before sealant cres. Paint surfaces completely before applying sealant. Before processing, observe the instructions in our product leaflets
and safety data sheets.
Our Company
Company profile
Shanghai Siway Building Materials Co., Limited was founded in 2005,
we are large scalecompany which focus on the curtain wall
construction, decoration products research anddevelopment. Main
products are Structural silicone sealant, Neutral silicone
sealant,Weatherproof silicone sealant, Stone silicone sealant,
Two-component insulating glasssilicone sealant, Polyurethane
Insulating glass sealant, Fast-drying Epoxy stone adhesive,PU foam
and other building material , which quality had reached the
advanced level. All ofour products comply with ISO 9001 Quality
Management System and ISO 14001
Environmental Management System, and also meet Chinese national
standard and ASTMstandard. Our products not only won a good
reputation in domestic, but also exported toEurope, North America,
South America, southeast Asia, the Middle East and other regions.