Results forcone calorimeter fire testingfrom 5367 Products.
|
|
Fire Flame Plastic Burning Test Chamber UL 94 Standard AC 220V 50Hz Model: RS-8224 Purpose: This machine is designed and manufactured according to USA UL 94 standard Burning ...
|
|
|
|
|
Advanced Technology Pull Testing Machine Wire Pull Tester Pull Yank Detector Model: IC1362 Product Description: Wire 45° Cone Pull Testing Machine Product Overview The Wire 45° ...
|
|
|
|
|
Wires And Cables Pull Tester Wire KICK Yank Tester Cone Pull Testing Machine Mode: IC1362 Product Description: Wire Pull Tester Product Overview The Ultimate Tool for Accurate and ...
|
|
|
|
|
30K Air Conditioner Air Enthalpy Method Calorimeter Energy Efficiency Temperature Humidity Test Chamber For Household Charter 1 Laboratory General Introduction Outline This air ...
|
|
|
|
|
EN 14543:2005+A1:2007 (E) Clause 7.2.2.2 Figure 1 Test Cone Protecting Against Accidental Contact With The Burner EN 14543:2005+A1:2007 (E) Specification for dedicated liquefied ...
|
|
|
|
|
ISO5356-1 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge ...
|
|
|
|
|
Cone tool | IEC60601-2-52-Figure 201 .103 a cone tool Key 1 Total weight 5,1 kg ±0,05 kg 2 Marked centre line 3 Surface roughness 1 ,6 4 Drilling hole for weight adjustment Figure ...
|
|
|
|
|
UL 1278 Figure 10.1 Cone Test Finger Probe for Heating Elements Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon ...
|
|
|
|
|
ISO 5356-1; Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used ...
|
|
|
|
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
Wedge tool | IEC60601-2-52-Figure CC.1 Wedge tool Material: Aluminium Weight: 3,34 kg Figure CC.1 – Wedge tool Cylinder tool | IEC60601-2-52-Figure 201 .103 b Cylinder tool Key 1 ...
|
|
|
|
|
Huawei and iphone Wire Taper Rotation Testing Machine Simulating under Certain Load Conditions Description: HD-6159E instrument is suitable for testing the service life of wires ...
|
|
|
|
|
Hot Flaming Oil Tester , Hot Flaming Oil Flammability Test Chamber IEC 60950 Annex A.3 Product overview: The hot flaming oil test device conforms to IEC60950-1:2005 and IEC60950-1...
|
|
|
|
|
11 .2.2 M E EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENT 11 .2.2.1 RISK of fire in an OXYGEN RICH ENVIRONMENT In ME EQUIPMENT and ME SYSTEMS , the RISK ...
|
|
|
|
|
ISO 80369-7:2017 Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications NOTE 1 Cone taper (0,06:1)...
|
|
|
|
|
UL 60335-2-24 Figure 101.DVA.2 Articulate probe with flat and cone shaped hand 10.5 – 11.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
Cone tool | medical bed standard equipment It is designed according to the standard iec60601-2-52 figure 201.103a. It is made of aluminum and weighs 5.13 ± 0.05kg Model KP-61521 ...
|
|
|
|
|
Abrasion Strength Testing Machine Abrasion ResistamceTester Product information The device is used to check abrasion strength of printed circuit boards or the insulating accessible ...
|
|
|
|
|
Covering Scratch Tester Product details: The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the ...
|
|
|
|
|
ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in ...
|
|
|
You may also be interested in :
