|
[China]
Trade Verify
Address: No.812, Nandidong road, Qiaonan street,Panyu district, Guangzhou city, Guangdong,China.
Contact name:Jell Young
Chanchiyo Holdings Group |
|
Verified Suppliers
|
|
|
1. Products Description
If you're looking for a small machine with bigger performances,then MCLLROY wheel loader is made for you with its amazing lifting and dumping height and huge breakout force when it is equipped with buckets,or with pallet forks,guaranteed max productivity.
We use Yunnei engine for this loader. Many developing countries do not currently have strict requirements on engine emissions. Therefore, for export to Southeast Asia, we use Yunnei engines. Yunnei engines are relatively stable in performance and affordable, and can be described as the most cost-effective engine among small loaders.
2. Specification
| Model | Metric Unit | MCL930 ZL930 | |
| Rated power | kw | 42 | |
| Rated Load | kg | 1600 | |
| Bucket Capacity | m³ | 1.0 | |
| Max.Dump Clearance | mm | 3200 | |
| Overall Size (L*W*H) | mm | 5500*1620*2750 | |
| Operating Weight | kg | 3500 | |
| Engine Model | YN490 | ||
| Engine speed/min | rpm | 2400 | |
| Dump Reach | mm | 1350 | |
| Gear Box | CVT | ||
| Axle | Small hub | ||
| Frame | Articulated | ||
| Bucket Length | m | 1.9 | |
| Tire | 20.5-16 | ||
| Joystick | Mechanical | ||
| Brake Type | Air brake | ||
| Air conditioner | Option | ||
| Hydraulic pilot | Option | ||
| Running hour meter | Option | ||
3. Details and Advantages
The main components of the loader are used brand-name manufacturer's products, interchangeability of good, reliable, well-resourced parts.
1) Tire:38% Rubber content tire,Wider off-road tire
2) Frame:The newest design ,small center precision turning radius, stable and thickened frame,strong and durable.
3) Cab:Optional ROPS/FOPS cab :flame retardant materials and EU-certified glass are used in the cab, offering higher safety.
4) Complete safety signs.
5) Large steps on the side of the frame also enhance accessibility.
4. Production lines:
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Steel plate cutting:
The cutting of the steel plate is closely related to the drawing design, workers' technique and cutting equipment.
Normally there are three types of cutting machines, you can see from the pictures here.
Frame cutting is used for iron plates over 40mm thick.
While plasma cutting is for steel plate that in between 20-40mm.
Laser cutting is for steel plate between 8-20mm.
It is great for cutting that requires high precision. For example, cutting steel components for bumper, hood, and driver's cab. The advantages of laser cutting are: low temperature, so the plate is not likely deformed; the disadvantage is that it consumes a lot of power.
When the steel sheet is uneven or the cutting speed is not steady, a melting point or break-point will form; so during the cutting process, workers need to go back and forth to check.
Similar Model:
Cat 903D/906M/907M/908M
XCMG LW156/LW160/LW180/LW186/LW200
Liugong 816C
SDLG LG916 LG918 L918
