Active Member
|
[China]
Address: No.88,yingbin road,industrial development zone,botou city,hebei province
Contact name:Li
hebei feixiang roll forming machinery co,ltd; |
|
|
Wall Panel Metal Roofing Pillar Design Tile Roll Forming Machine
1. Product Description
Wall Panel Metal Roofing Pillar Design Tile Roll Forming Machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling, continuous rolling and cold-forming, automatically cut to the size and specification which is required, and output the finished panels. The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realizes the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.
2. Machine details
Brand: Feixiang
Model number: Wall Panel Metal Roofing Pillar Design Tile Roll Forming Machine
Voltage requirement: 380v50HZ,3PH
Working speed:8-10/min
3. Machine composition
| No. | Name | Unit | Qty |
| 1 | Decoiler | set | 1 |
| 2 | Main Machine for roll forming | set | 1 |
| 3 | Control System(PLC) | set | 1 |
| 4. | Hydraulic oil pump | set | 1 |
| 5. | Product stand | set | 1 |
Decoiler have manual decoiler,Electric decoiler and Hydraulic decoiler,can booking as request
4. Main parameters
| 1 | Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| 2 | Thickness of coil sheet | 0.2-0.8mm |
| 3 | Coil width | 914 1000 1250 can design as request |
| 4 | Effective width | as request |
| 5 | Material of main frame | 350H steel |
| 6 | Diameter of Soild shaft | 70mm, high grade 45# steel |
| 7 | Roller | High grade 45# steel, quenched and tempered treatment, hard chrome plated 0.05-0.07mm |
| 8 | Thickness of middle plate | 16mm, 45# steel plate |
| 9 | Forming station | 16 roller station |
| 10 | Drive type | By chain(1.0 inch), link bearing model 6210, or gearbox, or gear |
| 11 | Power of main motor | 5.5 kw, |
| 12 | Sidewall connection bar | 25mm, zinc plated, or cast steel, or middle plate |
| 13 | Forming speed | About8-10m/min |
| 14 | Hydraulic pump station | 4.0 kw, 40# hydraulic oil |
| 15 | PLC | DELTA(TAIWAN)/Mitsubishi |
| 16 | Material of razor blades | Cr 12, quenching 58-62℃ |
| 17 | Frequency converter | It has the advantage of slowing down before cutting, to ensure the length accuracy ±1mm, far better than industrial standard ±3mm. |
| 18 | Switch | CHNT |
5. package and shipping
The machine naked in the container or packing as your required.
Payment: 30% T/T in advance and balance 70% after inspection
confirmation before shipment.
Delivery: within 45 working days after receipt of deposit
Guarantee: One year, and we will provide the technical support for
the whole life.
6. Machine Photo
