Galvanized Floor Deck Roll Forming Machine With 8 - 10/Min Working Speed

Galvanized Floor Deck Roll Forming Machine With 8 - 10/Min Working Speed

1. Product Description

Decking Roll Forming Machine Galvanized Decking Floor Sheet Forming Machine ,the finished product are of many features,such as simple shape,large wave height,high intensity and good adhesiveness when pouring the concrete together with the welded steel wire net on-site,in the high story building,it not only can save steel mould board,but also reduce the bearing of the floor: on basis of equal capacity,it reduces the steel amount of engineering useage,so that it saves cost of investment.

2. Machine details

Brand: Feixiang
Model number: Decking Roll Forming Machine Galvanized Decking Floor Sheet Forming Machine
Voltage requirement: 380v50HZ,3PH
Working speed:8-10/min

3. Machine composition

Decoiler have manual decoiler,Electric decoiler and Hydraulic decoiler,can booking as request

4.Main parameters

1. Matching material: colored armor plate with the bending intensity of 235-550MPA

2. Material thickness: 0.8-1.2

3. Main motor power: 22 kw

4. Forming speed: 8- 12m/min

5. Hydraulic station power: 5.5 KW

6.Roll stations: 25

7. Shaft Material and diameter: material is Cr 40, 95mm

8. Material of the body:450H steel. Wall Panel;20mm Q195 steel(all with electrostatic spraying)

9. Tolerance: +-1.5mm

10. Way of drive: chain

11. Controlling system: PLC

12. Total weight: about 12 Tons /12m*1.8m*1.6m

13. Voltage: 220V/ 3phase/ 60 Hz

14. Material of forming rollers: G c r 15

15. Material of cutter blade: Cr 12 mould steel with quenched treatment HRC58-6

5.package and shipping

The machine naked in the container or packing as your required.
Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment.
Delivery: within 45 working days after receipt of deposit
Guarantee: One year, and we will provide the technical support for the whole life.