|
[China]
Trade Verify
Address: BLOCK A,GANLIN INDUSTRY PARK,SHENGZHOU CITY,ZHEJIANG PROVINCE,CHINA
Contact name:Jacky
ZHEJIANG KAIDI REFRIGERATION EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Product name: Kaideli New Evaporator Blast Freezer Room Air Cooler For Cold Room
EF SERIES GROUND-TYPE BLAST FREEZER UNIT COOLERS
1. Product description:
EF series air cooler adopts floor type structure, which is mainly used for fast cooling processing or low temperature quick-freezing cold room.
● Casing:high quality galvanized steel with silver powder coating (RAL7001) , it has strong anti-corrosion property; The two sides plate adopt hinge structure, convenient and quick operation.
● Evaporator end plate adopts aluminum plate, effectively protect copper tube.
● Double water plate design: the outer water plate adopts angular structure, smooth drainage, no drainage dead angle; The inner water tray adopts the flume structure of aluminum plate. The condensed water or defrosted water is directly discharged into the outlet of the outer water tray through the inner water tray.
● The long air duct design with integral stretch arc has good air flow effect.
● Coil:copper pipe φ15, tube spacing 50×50 square arrangement, heat transfer area is large, heat transfer temperature difference is small, fin frosting speed is slow.
● Corrugated aluminum fins with hydrophilic film, fin spacing of 6.0, 9.0 and 12.0mm to meet the different requirements of cold room.
● Fan: operating temperature -45℃, blower type fan, equipped with more power, higher wind pressure motor, to ensure the external residual pressure, reduce the food surface wind speed, reduce dry consumption, improve the quality of frozen food.
● Defrosting:standard electric heating defrosting, stainless steel heating pipe are distributed on the coil tube fin and inner water plate, has a good defrosting effect. You can also choose hot gas defrost according to customer requirements.
● IP65 grade waterproof junction box and waterproof connector, the fan and heating pipe adopt independent wire box ,with better waterproof effect, high reliability.
● The outlet of the air cooler is equipped with schrader alve, which is convenient for users to detect pressure.
● Strict factory pressure test, test pressure 23bar.
● Expansion valve can be pre-installed according to customer requirements.
● It can meet refrigerant for R404A,R507A,R448A,R449A,R134a,R22 etc.
2. Standard configuration and options:
| Parts | Configuration | Parts | Configuration | |||
| Casing | Al-Mg alloy sheet with powder coating | × | Defrosting | Electric heating pipe | ● | |
| sheet with powder coating | ○ | Water defrosting | ○ | |||
| Galvanized sheet with powder coating | ● | Hot gas | ○ | |||
| Stainless steel plate* | ○ | Expansion valve | ○ | |||
Fan (blow) | WEIGUANG motor | ● | Drainpipe hot wire | ○ | ||
| EBM motor* | ○ | Wind duct heating belt | ○ | |||
| The wind bucket motor | ○ | |||||
| Suction type fan | ○ | |||||
| Fin | Aluminum fins | ○ | ||||
| Hydrophilic aluminum fins | ● | |||||
●:Standard；○:Options；×:Do not choose.
* : Use short side deflector air duct.
3. Technical data sheet:
3.1 Fin spacing 6.0mm
| Model | Capacity/R404A (KW) | Surface | Tube volume | Airflow | Connection pipe | Weight | ||||
Tc=0℃ ΔΤ=8K | Tc=-18℃ ΔΤ=7K | m2 | dm3 | m3/h | Inlet | Outlet | Drain | kg | ||
| EF632/DD-ET | 26.6 | 21.3 | 106.8 | 20.6 | 26000 | φ16 | φ35 | G2" | 243 | |
| EF632/ED-ET | 28.2 | 22.6 | 133.5 | 25.7 | 25000 | φ22 | φ42 | G2" | 254 | |
| EF632/FD-ET | 30.4 | 24.3 | 160.2 | 30.9 | 24000 | φ22 | φ42 | G2" | 266 | |
| EF634/DD-ET | 53.3 | 42.7 | 213.6 | 39.1 | 52000 | φ22 | φ42 | G2" | 373 | |
| EF634/ED-ET | 56.7 | 45.4 | 267.0 | 48.9 | 50000 | φ22 | φ42 | G2" | 396 | |
| EF634/FD-ET | 60.8 | 48.6 | 320.4 | 58.7 | 48000 | φ28 | φ54 | G2" | 418 | |
| EF636/DD-ET | 80.0 | 64.0 | 320.4 | 57.7 | 78000 | φ28 | φ54 | G2" | 522 | |
| EF636/ED-ET | 85.1 | 68.1 | 400.5 | 72.1 | 75000 | 2-φ22 | 2-φ42 | G2" | 555 | |
| EF636/FD-ET | 91.3 | 73.0 | 480.6 | 86.5 | 72000 | 2-φ22 | 2-φ42 | G2" | 589 | |
| EF638/DD-ET | 106.7 | 85.4 | 427.2 | 76.2 | 104000 | 2-φ22 | 2-φ42 | G2" | 670 | |
| EF638/ED-ET | 113.4 | 90.7 | 534.0 | 95.3 | 100000 | 2-φ28 | 2-φ50 | G2" | 715 | |
| EF638/FD-ET | 121.7 | 97.4 | 640.7 | 114.3 | 96000 | 2-φ28 | 2-φ50 | G2" | 760 | |
3.2 Fin spacing 9.0mm
| Model | Capacity/R404A (KW) | Surface | Tube volume | Airflow | Connection pipe | Weight | ||||||
Tc=0℃ ΔΤ=8K | Tc=-18℃ ΔΤ=7K | Tc=-25℃ ΔΤ=6K | m2 | dm3 | m3/h | Inlet | Outlet | Drain | kg | |||
| EF632/DJ-ET | 19.1 | 15.3 | 12.6 | 73.1 | 20.6 | 27000 | φ16 | φ35 | G2" | 241 | ||
| EF632/EJ-ET | 22.8 | 18.3 | 15.0 | 91.4 | 25.7 | 26000 | φ22 | φ42 | G2" | 252 | ||
| EF632/FJ-ET | 25.3 | 20.2 | 16.7 | 109.6 | 30.9 | 25000 | φ22 | φ42 | G2" | 263 | ||
| EF634/DJ-ET | 38.3 | 30.7 | 25.2 | 146.2 | 39.1 | 54000 | φ22 | φ42 | G2" | 369 | ||
| EF634/EJ-ET | 45.6 | 36.5 | 30.0 | 182.7 | 48.9 | 52000 | φ22 | φ42 | G2" | 391 | ||
| EF634/FJ-ET | 50.6 | 40.5 | 33.3 | 219.3 | 58.7 | 50000 | φ28 | φ54 | G2" | 412 | ||
| EF636/DJ-ET | 57.5 | 46.0 | 37.9 | 219.3 | 57.7 | 81000 | φ28 | φ54 | G2" | 516 | ||
| EF636/EJ-ET | 68.5 | 54.8 | 45.2 | 274.1 | 72.1 | 78000 | 2-φ22 | 2-φ42 | G2" | 548 | ||
| EF636/FJ-ET | 76.0 | 60.8 | 50.1 | 328.9 | 86.5 | 75000 | 2-φ22 | 2-φ42 | G2" | 580 | ||
| EF638/DJ-ET | 76.7 | 61.4 | 50.6 | 292.4 | 76.2 | 108000 | 2-φ22 | 2-φ42 | G2" | 663 | ||
| EF638/EJ-ET | 91.3 | 73.1 | 60.2 | 365.5 | 95.3 | 104000 | 2-φ28 | 2-φ50 | G2" | 705 | ||
| EF638/FJ-ET | 101.3 | 81.1 | 66.8 | 438.6 | 114.3 | 100000 | 2-φ28 | 2-φ50 | G2" | 748 | ||
3.3 Fin spacing 12.0mm
| Model | Capacity/R404A (KW) | Surface | Tube volume | Airflow | Connection pipe | Weight | ||||
Tc=0℃ ΔΤ=8K | Tc=-18℃ ΔΤ=7K | Tc=-35℃ ΔΤ=6K | m2 | dm3 | m3/h | Inlet | Outlet | Drain | kg | |
| EF632/DK-ET | 16.1 | 12.9 | 10.4 | 56.2 | 20.6 | 27500 | φ16 | φ35 | G2" | 242 |
| EF632/EK-ET | 19.2 | 15.4 | 12.5 | 70.3 | 25.7 | 26600 | φ22 | φ42 | G2" | 253 |
| EF632/FK-ET | 21.0 | 16.8 | 13.6 | 84.4 | 30.9 | 25600 | φ22 | φ42 | G2" | 265 |
| EF634/DK-ET | 32.2 | 25.8 | 20.9 | 112.5 | 39.1 | 55000 | φ22 | φ42 | G2" | 372 |
| EF634/EK-ET | 38.6 | 30.9 | 25.1 | 140.6 | 48.9 | 53200 | φ22 | φ42 | G2" | 394 |
| EF634/FK-ET | 42.1 | 33.7 | 27.4 | 168.7 | 58.7 | 51200 | φ28 | φ54 | G2" | 416 |
| EF636/DK-ET | 48.5 | 38.8 | 31.5 | 168.7 | 57.7 | 82500 | φ28 | φ54 | G2" | 520 |
| EF636/EK-ET | 57.8 | 46.3 | 37.5 | 210.9 | 72.1 | 79800 | 2-φ22 | 2-φ42 | G2" | 553 |
| EF636/FK-ET | 63.2 | 50.6 | 41.0 | 253.1 | 86.5 | 76800 | 2-φ22 | 2-φ42 | G2" | 586 |
| EF638/DK-ET | 64.6 | 51.7 | 42.0 | 225.0 | 76.2 | 110000 | 2-φ22 | 2-φ42 | G2" | 667 |
| EF638/EK-ET | 77.2 | 61.8 | 50.1 | 281.2 | 95.3 | 106400 | 2-φ28 | 2-φ50 | G2" | 711 |
| EF638/FK-ET | 84.4 | 67.5 | 54.8 | 337.5 | 114.3 | 102400 | 2-φ28 | 2-φ50 | G2" | 755 |
1. In the table ,Tc is cold room temperature, ΔΤ is difference between cold room temp. and evaporation temp.
2. For cooling capacity of other working conditions, please refer to the correction coefficient.
4. Electrical parameter table:
| Model | Fan motor | Electric defrosting | |||||
| Voltage(V) | Power(W) | Current(A) | Speed(r/min) | Coil(KW) | Tray(KW) | Total(KW) | |
| EF632/D* | 380-3 | 2900 | 5.8 | 1390 | 12×0.8 | 2×0.8 | 11.2 |
| EF632/E* | 380-3 | 2900 | 5.8 | 1390 | 16×0.8 | 2×0.8 | 14.4 |
| EF632/F* | 380-3 | 2900 | 5.8 | 1390 | 16×0.8 | 2×0.8 | 14.4 |
| EF634/D* | 380-3 | 5800 | 11.6 | 1390 | 12×1.6 | 2×1.6 | 22.4 |
| EF634/E* | 380-3 | 5800 | 11.6 | 1390 | 16×1.6 | 2×1.6 | 28.8 |
| EF634/F* | 380-3 | 5800 | 11.6 | 1390 | 16×1.6 | 2×1.6 | 28.8 |
| EF636/D* | 380-3 | 8700 | 17.4 | 1390 | 12×2.3 | 2×2.3 | 32.2 |
| EF636/E* | 380-3 | 8700 | 17.4 | 1390 | 16×2.3 | 2×2.3 | 41.4 |
| EF636/F* | 380-3 | 8700 | 17.4 | 1390 | 16×2.3 | 2×2.3 | 41.4 |
| EF638/D* | 380-3 | 11600 | 23.2 | 1390 | 12×3.0 | 2×3.0 | 42.0 |
| EF638/E* | 380-3 | 11600 | 23.2 | 1390 | 16×3.0 | 2×3.0 | 54.0 |
| EF638/F* | 380-3 | 11600 | 23.2 | 1390 | 16×3.0 | 2×3.0 | 54.0 |
5.How to select correct evaparator:
Generally,Choose evaporator capacity=cold room cooling capacity *1.15
1.When the cold room temperature is around 0℃, select 4.5mm as fin space.
Evaporator choose=1.0*Q0
2.When the cold room temperature is around -18℃, select 6mm as fin space.
Evaparator choose=1.1*Q0
3.When the cold room temperature is around -25℃, select 9mm as fin space.
Evaparator choose=1.27*Q0
Remarks: The water defrost and hot gas defrost type are also optional.
Customized specification leave me message for details.
6.Want to know other related products?-click picture for detailed specification
7.How to assure quality? Any procedure?
Our QC department will make sure of each step
8.Do you factory?
We are factory established in 1995 and through 28years
developed,welcomed by all our customers.Because of all your support
now we are a big family of more than 300 people,covered 50000
square meters,and your supporting is very important of continuing
our dream of eating fresh and healthy food.
9.Do you attend exhibition?
Each year we will attend domestic national and foreign exhibition,also we will support our agent to attend exhibition,welcome to join us.
10.Why choose us
Professional:28 years focus one thing-refrigeration equipments
Material we use sufficient
Certificate:CE, ISO, and cetiifcate of producing special pressure equipment
11.Projects reference?
12.FAQ
1, Q:Where is your factory address?
A:We are factory and located in refrigeration equipment producing base Shengzhou,Zhejiang province.
2, Q: What is your package?
A: Our package comply to custom require not include original wood.
3, Q:What is your MOQ?
A: Ordinary products can order from 1 set.
4, Q: Can you offer sample?
A: Yes,we can offer sample.and cost and delivery at your charge.
5, Q:I can't find products on your list?
A: Please contact me directly.
6,Q:How can i confirm your factory?
A: We have third party verified document of Bureau Veritas report,you can download in company page or leave me message to get.
