Active Member
|
[China]
Address: 江苏省无锡市惠山区洛社镇石塘湾运河东路5号
Contact name:Jillian Zheng
Wuxi Shuangyong Precision Stainless Steel Belt Co., Ltd. |
|
|
Bright Annealing Cold Rolled Steel Coil Zinc Coated Steel DC04 EN10268 EN10130
STANDARDS
Q/TB303,EN 10130:DC04,DC03; Q/TB302,JIS G3141 :SPCC,SPCD
EN 10130:DC04; JIS G3141 :SPCE;
Q/TB303-2008:DC01( O3), DC03( O3);
STANDARDS :2010JX(25) :TYH-2; 2010JX(12) :TYH-3; 2010JX(22) :TYH-4;
STANDARDS :GBT11253-2007: Q235; 2011 JX(19):LQ215; 2011 JX(21):THD
STANDARDS : EN10268:2006:HC340LA
STANDARDS : 2010JX(42):TGW800-1, TGW1000A-1, TGW1000B-1
Application and Features
With good weldability, formability and machinability,the products are mainly used in building ,appliances, automobile and general structure.
Mechanical Properties
Purpose | Grades | Yield strength/Re/MPa(1) | Tensile strength/ Rm/MPa | Elongation/A80/%(2) | r90 | n90 |
Commercial | DC01 | ≤280 | 270-410 | ≥28 | - | - |
Drawing | DC03 | ≤240 | 270-370 | ≥34 | ≥1.3 | - |
1. If the yield point is not pronounced, the value applies to Rp0.2; if the yield point is pronounced, the value applies to Rel. 2. When the thickness is less than or equal to 0.7 mm and greater than 0.5 mm, the minimum value for elongation is reduced by 2 units. For a thickness less than or equal to 0.5 mm, the minimum value is reduced by 4 units. | ||||||
Purpose | Grades | Yield strength/Re/MPa(1) | Tensile strength/ Rm/MPa | Elongation/A80/%(2) | 180oBend test | ||||
h < 0.4 | ≥0.4~<0.65 | ≥0.6~<1.0 | ≥1.0~<1.6 | ≥1.6~<2.0 | b≥20mm | ||||
Commercial | SPCC | - | ≥270 | ≥32 | ≥34 | ≥36 | ≥37 | ≥38 | d=0a |
Deep drawing | SPCD | ≤240 | ≥270 | ≥36 | ≥36 | ≥38 | ≥39 | ≥4O | d=0a |
