Active Member
|
[China]
Address: Tuanjie Industrial Zone, Xin'an Town, Bazhou City, Langfang City, Hebei Province (in Yangzi Management Institute)
Contact name:Zhang
Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch |
|
|
Automatic Tube Cold Cut Fly Sawing Tube Machine
Introduction
The double saw blade cold cutting flying saw can save the saw blade
and reduce the cost of using the saw blade. The cold cutting flying
saw blade cuts through the profile of the pipe, and the cost of two
small saw blades is much lower than the price of a large saw blade.
| Material | Q195 Q235 SPCC | |
Cutting range | Round tube:MAX114mm | thick:0.5～4.0mm |
| Square tube:MAX90×90mm | thick:0.5～4.0mm | |
| Rectangular tube:MAX 50×90mm | thick:0.5～4.0mm | |
| Production speed | 80m/min(length 6 meter,dia.≤25mm) | |
| Feeding direction | ||
| Operation height | 800mm | |
| Power supply | AC380V,3PH,50HZ | |
Features
1. Equipped with adjustable cooling spray pipeline to flush the impurities and iron filings on the saw blade and clamping block;
2. Sawing method: saw blade and feed are adjustable, that is to say, the speed of the feed servo motor is variable, and the speed of the saw blade is variable, so that the utilization rate of the saw blade is greatly improved; and the saw blade wear protection system is provided.
3. The saw blade is equipped with a steel brush device to remove iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to
help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold
flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
