Home Companies Color Optic Limited

100G QSFP28 SWDM4 SFP Optical Module Transceiver For Duplex MM Ethernet LC Connector

Color Optic Limited

Contact Us

[China] country

Trade Verify

Address: 8th floor, Daqing building A, Futian District, Shenzhen, China.

Contact name:Li

Inquir Now

Color Optic Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

100G QSFP28 SWDM4 SFP Optical Module Transceiver For Duplex MM Ethernet LC Connector

Country/Region china
City & Province shenzhen
Categories Other Surveillance Products
InquireNow

Product Details

100G QSFP28 SWDM4 Transceiver Module for Duplex MM Ethernet LC connector

 

 

The 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA.

 
Key Features
  • Compliant with QSFP28 MSA
  • Compliant with SWDM MSA
  • Compliant with IEEE802.3bm CAUI-4
  • Hot-pluggable QSFP28 form factor
  • 4x25Gb/s 850mm VCSEL-based transmitter
  • Supports 103.1Gbps aggregate bit rate
  • Power dissipation<3.5W
  • Maximum link length of 150m on OM5 multimode Fiber
  • Case temperature range of 0°C to 70°C
  • Duplex LC receptacles
  • CAUI-4 electrical interface
  • RoHS compliant 
Application
· 100G Ethernet over Duplex MM

· Enterprise networking

 
Product Detail

It is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.  We stand behind the quality of our products and proudly offer a limited lifetime warranty.

 

Notes:

1. RMS spectral width is the standard deviation of the spectrum.

2. The normative lowest value of OMA for a compliant transmitter is ‘Launch power in OMA minus TDEC, each lane (min)’ plus the actual value of ‘TDEC’, but with a value of at least ‘OMA, each lane (min)’.

3. TDEC is calculated from the measured TDECm using the methods in 3.6. TDECm is measured following the method in IEEE 802.3 clause 95.8.5 using a 12.6 GHz bandwidth reference receiver for all lanes.

4. If measured into type A1a.2 or type A1a.3 50 um fiber in accordance with IEC 61280-1-4.

 

 

Outline Dimensions:

Innovations

The manufacturing environment is strictly compliant with most advanced technological standards, ensuring our products a long term reliability.

 

Quality & Assurance

Our Cutting-Edge test equipment verifies that each of our products meets our high-quality standards

 

Customization

Thanks to the specialists of our Engineering Department, we have full control over both the hardware and the software of all our transceivers. Need your personal labelling? No problem, just ask and we provide!

 

Multi-Compatibility

ColorOptic offers a true cost-effective solution for all major platforms including the original vendor firmware.

 

Technical Support

Any issues with your equipment? We are already dispatching an engineer to your premises to fix it. We are 7x24 hours online supports.

   

Hot Products

100G QSFP28 SWDM4 Transceiver Module for Duplex MM Ethernet LC connector The 100G QSFP28 SWDM4 ...
Arista Compatible 25Gb/s SFP28 30km Bi-directional DOM Duplex LC SMF Optical Transceiver Module *, *...
200G QSFP-DD ER4 40km With FEC Optical Transceiver With Full Real-Time DDM Sfp Ethernet This product ...
100G QSFP28 LR1 BIDI Optical Transceiver 10KM SMF Single Fiber 100G QSFP28 BiDi LR1 single-fiber ...
QSFP28 LR4 Optical Module for 100GBASE-LR4 Ethernet Links, Infiniband & Data Center 100G QSFP28 LR4 ...
Arista SFP-25G-SR Compatible 25GBase-SR SFP28 850nm 100m DOM Duplex LC MMF Optical Transceiver ...