Home Companies Color Optic Limited

100G QSFP28 ER4 Lite SFP Optical Transceiver 40km Reach Hot Pluggable

Color Optic Limited

Contact Us

[China] country

Trade Verify

Address: 8th floor, Daqing building A, Futian District, Shenzhen, China.

Contact name:Li

Inquir Now

Color Optic Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

100G QSFP28 ER4 Lite SFP Optical Transceiver 40km Reach Hot Pluggable

Country/Region china
City & Province shenzhen
InquireNow

Product Details

 

100G QSFP28 ER4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control 4- EML with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single–mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a SOA+PIN and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and 2-wire serial interface.

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA) and compliant to IEEE 802.3ba

 
Key Features
  • Hot pluggable QSFP28 MSA form factor
  • Compliant to 100G 4WDM-40 MSA
  • Supports 103.1Gb/s aggregate bit rate
  • Up to 30km reach for G.652 SMF without FEC
  • Up to 40km reach for G.652 SMF with FEC
  • Single +3.3V power supply
  • Operating case temperature: 0~70
  • Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58,
    1309.14nm)
  • Receiver: 4x25Gb/s APD ROSA
  • 4x25G electrical interface (OIF CEI-28G-VSR)
  •  Maximum power consumption 5W
  • Duplex LC receptacle
Application
· 100GBASE-LR4 Ethernet Links
· Infiniband QDR and DDR interconnects
· Client-side 100G Telecom
 
Product Details
ParameterSymbolMinTypicalMaxUnitsNo
Operating Case TemperatureTOP0 70degC 
Link Distance with G.652(with FEC)D  40km 
Power Consumption   5W 
Center WavelengthL01294.531295.561296.59nm 
L11299.021300.051301.09nm 
L21303.541304.581305.63nm 
L31308.091309.141310.19nm 
Average Launch Power,each LanePAVG-2.5 6.5dBm 
OMA, each LanePOMA0.5 6.5dBm 
Average Receive Power,each Lane -20.5 -3.5dBmfor
40km
Link
Distance
Receive Power(OMA),each Lane   -3.5  
Receiver Sensitivity(OMA),each LaneSEN  -18.5dBmfor BER
= 5x10-5

 

 

Outline Dimensions:

Innovations

The manufacturing environment is strictly compliant with most advanced technological standards, ensuring our products a long term reliability.

 

Quality & Assurance

Our Cutting-Edge test equipment verifies that each of our products meets our high-quality standards

 

Customization

Thanks to the specialists of our Engineering Department, we have full control over both the hardware and the software of all our transceivers. Need your personal labelling? No problem, just ask and we provide!

 

Multi-Compatibility

ColorOptic offers a true cost-effective solution for all major platforms including the original vendor firmware.

 

Technical Support

Any issues with your equipment? We are already dispatching an engineer to your premises to fix it. We are 7x24 hours online supports.

  3 years

Hot Products

100G QSFP28 ER4 optical Transceiver integrates receiver and transmitter path on one module. In the ...
100G QSFP28 BiDi ER1 Single-Fiber Optical Transceiver Module For 40km SMF Transmission 100G QSFP28 ...
100G QSFP28 ZR4 Optical Transceiver, Support Multi-Pin Function, Hot Pluggable, 0-70°C 100G QSFP28 ...
25G Ethernet SFP Optical Module with 1310nm DFB Transmitter, -40~85°C This 25G SR optical transceive...
Fiber Channel Sfp Transceivers 4.25G SW MMF 850nm 300m With Lc Connector ColorOptics’ transceiver ...
12 Cores MPO Patchcord Fiber Cable For Data Center Cabling Interconnection MPO pre terminated cable ...