Home Companies Color Optic Limited

Breakout AOC Active Optical Cable 100G QSFP28 To 4 SFP28 25G Low Power Consumption

Color Optic Limited

Contact Us

[China] country

Trade Verify

Address: 8th floor, Daqing building A, Futian District, Shenzhen, China.

Contact name:Li

Inquir Now

Color Optic Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Breakout AOC Active Optical Cable 100G QSFP28 To 4 SFP28 25G Low Power Consumption

Country/Region china
City & Province shenzhen
InquireNow

Product Details

AOC active Cable 100G QSFP28 to 4 SFP28 25G beak out Low Power Consumption Infiniband application
General Description

The Color Optic CO-ACQ100-4S25-x is QSFP28 4-channel active optical cables (AOC) for 100G Ethernet (100GbE) applications. This full-duplex optical assembly offers 4 independent transmit and receive channels, each capable of up to 25Gbps for an aggregate bandwidth of 100Gbps. The 100G QSFP28 AOC cables can be used as a direct replacement for traditional QSFP28 DAC (direct attach copper cables) and QSFP28 transceivers of short reach while providing lighter weight, improved signal integrity, lower cost, and performance value. The optical end is never exposed to a data center environment and therefore does not require cleaning or special handling. They are designed expressed for high speed, high density and low power consumption for today’s data center networking applications.

 

Key Features
  • Hot-pluggable QSFP28 form factor
  • 4 high-speed full duplex channels
  • Supports 103.1Gb/s aggregate bit rate
  • 4x25Gbps 850nm VCSEL laser
  • QSFP28 MSA compliant
  • Operating environment temperature -5 ~ 70℃
  • Low power dissipation:<3.5W per cable end(<2.5W with CDRs off)
  • Available in lengths of 1 to 100 meters
  • RoHS-6 compliant

 

Application
  • 1000GbE and 25GbE break-out applications for Datacom switch and router connections
  • 100G to 4×25G density applications for Datacom and Proprietary protocol applications
  • 100 Gigabit Ethernet links
  • Infiniband interconnect
  • Data center cabling infrastructure
  • High density connections between networking equipment
Product Details
Recommended Operating Conditions
ParameterSymbolMinTypicalMaxUnit
Operating Case TemperatureTc0 +70°C
Supply VoltageVcc3.143.33.46V
Supply CurrentIcc  300mA
Bit RateBR 25.78 Each channel

 

Electrical Characteristics
ParameterSymbolMinTypicalMaxUnitNotes
Transmitter Characteristics
Signaling rate, each laneDRpl 25.78125 Gb/s1
Center Wavelengtheλ840850860nm 
RMS Spectral Width  0.6 nm 
Average launch power, each lanePavg-8.4 2.4dBm 

Optical modulation amplitude,

each lane (OMA)

OMA-6.4 3dBm 
Extinction ratioER2  dB 

Average Launch Power of OFF

Transmitter, per Lane

RIN  -30dBm 
Encircled FluxFLX

>86% at 19 um

<30% at 4.5 um

dBm 
Optical return loss tolerance   12dB 

Transmitter eye mask {X1, X2, X3,

Y1, Y2, Y3}

 {0.3,0.38,0.45,0.35,0.41,0.5} 2
Receiver Characteristics
Receive Rate for Each LaneDRpl 25.78125 Gb/s3
Four Lane Wavelength Rangeλ840850860nm 
Overload Input Optical PowerPmax3.4  dBm 

Average Receive Power for Each

Lane

Pin-10.3 2.4dBm4
Receiver Sensitivity(OMA)per lanePsens -5.2 dB 
Recevier ReflectanceRfl  -12dB 

Receiver Eye MaskDefinition {X1,

X2, X3, Y1, Y2,Y3}

 {0.28,0.5,0.5,0.33,0.33,0.4} 5
Los De-AssertPd  -13dBm 
Los AssertPa-30  dBm 
Loss HysteresisPd-Pa0.5  dBm 

 

 

Hot Products

AOC active Cable 100G QSFP28 to 4 SFP28 25G beak out Low Power Consumption Infiniband application ...
AOC Cable 40G QSFP+ 3-100m Lengths - Low Power Consumption Infiniband QDR/DDR/SDR General Descriptio...
AOC active Cable 40G QSFP+ to 4 SFP+ 10G beak out Low Power Consumption Infiniband QDR/DDR/SDR ...
DAC Direct Attach Copper Passive Cable SFP+ 10G To SFP+ 10G For 10G Fiber Channel Application Color ...
QSFP-DD 200G to QSFP-DD 200G InfiniBand HDR High Data Rate 15m, DOM for 200GbE systems This is a ...
DAC Cable 10G SFP+ Copper Direct Attach Cable, Passive For Data Centers 10G SFP+ DAC (Direct-attach ...