Tapping / Drilling CNC Vertical Machining Center Japan Mitsubishi Fanuc CNC Machine

Tapping / Drilling CNC Vertical Machining Center Japan Mitsubishi Fanuc CNC Machine

CNC Vertical Machining Center for Tapping and Drilling:

     Taesin CNC Vertical Machining Center can do tapping at a high speed, This tapping centers can thread holes in just a little time and also make deeper holes in harder materials such as steel, iron, aluminium. But the tapping center need various size tap for different size holes. For solve this problem, a tool magazine is equipped with Taesin CNC Vertical Machining Center, just 2.0 seconds tool change interval. As general rule of thumb, it is best to employ tapping when you need to make a lot of holes with few variations in size.

     Taesin CNC Vertical Machining Center Can also do milling with the ability to control the fit. The hole is milled at a high RPM, and the tool goes into the hole in the shape of helix. So, the machine operator has the ability to adjust thread size using a strategy similar to using an end mill, rather than a drill bit to make a hole. This can be advantageous if there are tight tolerances on the thread sizes or if allowances need to be made for finishing such as painting.

     Taesin CNC Vertical Machining Center provides a advantage of combining the productivity with versatility and flexibility. Taesin CNC Machining Center is designed with a good blend of speed, torque and power to provide highest performance and Stability. The cutting capability can let you do any machining with the help of high performance spindle technology, powerful control and human-friendly design. Loading and unloading are easily controlled; programs and data can be effectively managed; chips and coolant can be easily managed.

     Taesin CNC Vertical Machining Center has the large machine bed casting, which is good for high cutting performance, long-term accuracy and damping against vibration. The large-size and symmetrically designed bed structure can keep the machine in good geometries and uniform thermal characteristics.

CNC Vertical Machining Center Core Components:

High Rigidity Direct-connected High-speed Spindle: 12000RPM

X/Y/Z Axis Traverse Speed: 48/48/48m/min

Fast Tool Change System: 2.0S (24T Disc too magazine)

Taiwan high-speed Linear Guide Way, X/Y Axis Ball type (30mm), Z Axis Roller Axis (35mm)

High strength and rigidity meehanite casting is treated with annealing for stress relieving; and more than 1.5 years natural aging brings no deformation

X/Z Axis: 6 sliders for 60% higher stability than traditional

X/Y/Z motor connected directly with ball screw: high-precision processing

CNC control system: we use Japan Mitsubishi, Fanuc or Germany Siemens brand
For spindle motor and 3 axis motor: we use Japan Mitsubishi, Fanuc or Siemens brand
Spindle brand from Taiwan
Taiwan HIWIN and PMI Guideway and Ball Screw

Taiwan Famous Brand 24T Arm Type Tool Magazine
Bearings: Japan NSK

CNC Vertical Machining Center Technical Data: