|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-020B Custom woodworking TCT circular saw blade front and rear Angle grinding mac
What do you need to pay attention to when maintaining the gear grinding machine:
1,Maintenance of the hydraulic system For the maintenance of the hydraulic system, when the machine tool is used for a period of time, the viscosity and other performance indicators of the hydraulic oil will be affected, the cleanliness of the oil will also decline, and the wear and tear of some relatively sophisticated hydraulic valves will have a significant negative effect, so the hydraulic oil should be precipitate and filtered once in a month or so, and replaced once in three months. This can improve the service life of the hydraulic components, while the solenoid valve, pressure valve, throttle valve, relief valve and pressure relay to do a good job of inspection, especially in the case of the pressure gauge jitter more than ±0.5×105Pa must stop using, clean the valve core with clean gasoline, so that it can work normally.
2,Electrical system maintenance Electrical system is mainly a number of control components, such as relay output, input interface, electrical box module, cable floor immersion maintenance, to regularly check these components, cable as far as possible to take elevated wiring, do not fall, to avoid other signal interruption.
3,The maintenance of the mechanical mechanism is mainly whether the bearing load accuracy meets the requirements, whether the lubrication of each lubrication part is in place, and try to avoid the gear burn at the high-speed running gear, and the improper lubrication of the guide rail makes the guide rail strain and other phenomena.
| Main Technical Parameters : |
| Range of external diameter of processing:￠200-￠1200mm |
| Inner bore of saw blade:￠10-220mm |
| Thickness of saw web (steel plate):1-12mm |
| Pitch range:7-100mm |
| Tooth face angle:5°~+30° |
| Tooth top dorsal angle:6-45° |
| Tooth left/right gradient: Tooth top/tooth face 45° |
| Cutter grinding stroke range: Max. 25mm (adjustable) teeth/min |
| Grinding speed:0.5-6mm/s |
| Working speed: Max. 20 teeth/min |
| Grinding wheel dimensions (outer diameter * bore): (￠125mm*￠32mm*1mm) |
| Negative chamfer grinding: -27° |
| Grinding head rotation angle: 90° and 180°Grinding speed: 26m/s |
| Coolant pump flux:501/min |
| Coolant cylinder volume: 85L |
| Total power: 2.2KW |
| Voltage:three-phase 380v |
| Total weight of equipment:800KG |
| Appearance(Long*Width*Height):1500X1200X1800mm |
| Technical features: |
| This machine is designed in reference to the features of domestic and foreign similar types, which absorbs and analyzes the advantages of the same type and improves the functions to some extent at the same time. |
| 1. Preset many groups of tooth types and one-key multifunctional operation. |
| 2. Trapezoid flat teeth can be finished at a time, features CNC grinding and arbitrary tooth types, and can improve the efficiency by 3 times; due to the adoption of improved tooth extraction operation, the accuracy is improved, and the service life is prolonged. |
