|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-020A Woodworking saw blade automatic TCT saw blade grinding machine manufacturers
Circular saw blade sharpening machine maintenance:
1,Clean the machine after each use to remove sawdust and dust, especially inside the machine and on the surface of the grinding wheel. Clean the machine regularly, remove iron filings and dirt, and apply the appropriate lubricant to ensure that the machine runs smoothly.
2,Check the grinding wheel regularly for wear or breakage. If found wear or damage, timely replacement or repair. Regularly check and adjust the blade installation, cutting depth and tool clearance of the machine to ensure the cutting effect and safety.
3,Replace the grinding wheel regularly. In general, the life of the grinding wheel depends on the frequency of use and the material grinding, and it is usually replaced every 50 to 100 workpieces used. Replace blades, grinding wheels and other vulnerable parts of the machine regularly to ensure proper operation.
4,Check whether the power cord and plug of the machine are damaged or aged to avoid safety risks.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades
and woodworking saw blades. It is easy to operate and can fully
extend the service life of TCT saw blades. Each blade can be reused
15-30 times. This equipment has received praise from many buyers. |
