Active Member
|
[China]
Address: Bowang Industrail Park,Bowang Town ,Maanshan ,Anhui,China
Contact name:sales
Anhui YUANJING Machine Company |
|
|
5000Ton NONSTICK PAN FRYING PAN COLD FORGING HYDRAULIC PRESS
5000T cold forging hydraulic press, mainly be used for induction bottom pot, non-stick pot. Under pressure, press two metals together. The double-bottomed pot contacts the heat source layer and transfers heat quickly, which can make the heat and temperature distribution uniform. The layer inside the pot is smooth, wear-resistant, not easy to rust, and will not produce compounds harmful to human health.
 | |
 |  |
Application:
 |  |
Key Features:
| 1.The frame are welded frame structure, the force condition is reasonable, the design safety factor is high, and the service life can reach more than 15 years. |
| 2. Under full load, the table deformation is only 0. 5~1mm/m, ensuring high precision suppression. |
| 3. The main cylinder adopts the international advanced anti-leakage composite sealing technology and metal expansion ring sealing technology, which can greatly improve the reliable life of the cylinder seal. |
| 4. The cylinder piston adopts advanced composite bimetal welding technology, which improves the wear resistance and reliable life of the cylinder, and the service life can reach more than 30,000,000 times. |
| 5.Fast cylinder technology can realize no power and rapid down, improve work efficiency and save energy. |
| 6.The servo oil pump system combines the fast stepless speed regulation characteristics of the servo motor and the self-regulating oil pressure characteristics of the hydraulic oil pump, which brings huge energy saving potential, and the energy saving rate can reach up to 30%-80%. |
Data Sheet
| NO | Name | Parameters |
| 1 | Model | 5000Ton |
| 2 | Nominal force | 50000KN |
| 3 | Working pressure of hydraulics, Mpa | 80 Mpa |
| 4 | Press plate material | Steel |
| 5 | Main cylinder stroke | 350 mm |
| 6 | Daylight | 1100 mm |
| 7 | Main Cylinder qty | 1 |
| 8 | Frame type | Frame Structure |
| 9 | Ejection Cylinder Force | 500 KN |
| 10 | Ejection Stroke | 0-350 mm |
| 11 | Servo motor | 60x3 kw |
| 12 | Maximum speed plate lifting | 200 mm/sec |
| 13 | Plate closing speed | 200 mm/sec |
| 14 | Plate working speed | 5-19 mm/sec |
| 15 | Weight of machine | 70 Ton |
| 16 | Worktable size | 1250x1250 mm |
| 17 | Dimensions | 3380x1980x4390 mm |
Structural Components
1. The hydraulic press machine has built-up type frame structure
and is comprised of a main machine and a control mechanism. The
equipment consists of a whole frame, electrical system, hydraulic
system.
2. The control mechanism is comprised of a hydraulic system, an
electrical control system, a stroke limiting device, pipelines, an
electrical control box and other auxiliary parts. The electrical
system and the hydraulic station are connected into one via oil
pipes and lead wires to realize the procedure of whole actions.
3. The main body of the slide is #45 steel whole plate. The bottom
plate of the slide is a whole steel plate ensuring sufficient
rigidity and strength. The guidance of the slide is sideling wedge
style with foursquare and eight friction faces guide rail, which
gives high precision and rigidity. After adjustment, no precision
difference occurs, precision is well kept and the load-deflection
resistance capacity is strong, ensuring slide operation precision,
that the slide can withstand a large eccentric load and that the
slide operates smoothly without chatter. The guide rail beside
slide is made by copper-base alloy, adopt bow-shape oil slot
structure to make sure guide rail oil no leaking, increase
anti-wearing ability of the slide. On the guide rail there are
special deisgned oil filling holes for auto oil-filling, beneath
there are oil recieve box to avoid oil stain the floor.
Hydraulic Control System
1. The hydraulic control system is mainly placed side of equipment,
where been designed maintainess platform, has tidy appearance and
is easy to maintain. The hydraulic system is comprised of an oil
tank, a hydraulic main control system, a pump station, a pressure
gauge, a strainer and other accessories. They are connected into a
whole hydraulic control system mainly via pipelines.
2. The hydraulic system is mainly characterized by proportional and
servo close-loop control, dual support protection control, etc.
3. Oil tank been set forced cooling filtering system(industrial
plate-type water cooling device, cooling by circulating water, oil
temperature≤55℃,make sure machine can steadily pressing in 24
hours.) to ensure oil temperature been controlled in allowed range.
Oil temperature warning type: oil up to 40℃, temperature alert
appears on touchscreen, forced cooling system automatic working.
Oil up to 55℃, motor shut down, operation stop, temperature alert
appears on touchscreen.
4. The pressure of slide is regulated by using a proportional
pressure valve and a manual remotely regulated pressure valve; 2
mode can be switch freely. (An acceleration and deceleration device
for servo control pressure and flow fluctuation is installed in the
system, which can better improve pressure control stability.) The
pressure at the proportional regulation mode is set and displayed
directly on the touch screen. The pressure display precision is
0.1Mpa, and the pressure control precision is less than ±0.3Mpa.
