Home Companies Envsin Instrument Equipment Co., Ltd.

High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber

Envsin Instrument Equipment Co., Ltd.

Contact Us

Trade Verify

Address: 139, Yinxing Technology Building, No. 1235, Guangguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen

Contact name:Jack He

Inquir Now

Envsin Instrument Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber

City & Province shenzhen
Categories Measuring & Analysing Instrument Agents
InquireNow

Product Details

High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber

   

           The humidity test chamber is suitable for the whole machine, parts, materials for constant high temperature, low temperature or temperature cycle conditions test.The humidity test chamber can be used for the heat dissipation test sample and non-heat dissipation

test sample test. For the test of heat dissipation test sample, heat dissipation power can not exceed the cooling capacity of the refrigeration system of humidity test chamber, because the control of temperature is a dynamic balance process, at different temperature points, the cooling capacity of the refrigeration system is also accompanied by changes.

 

Specification:
Model:humidity test chamberEC4150
Test Space Volume(L)1540
Temperature Test Parameters:
Temp. Range (℃)-42/+180
Temp. Constancy (℃)

±0.1-±0.5

Temp. Homogeneity (℃)

±0.5-±2.0

Heating Rate(℃/min)3.5
Cooling Rate (℃/min)2.5

Temp. Max. Thermal Compensation (W)

4200
Climate Test Parameters:
Dewpoint Temp. Range (℃)

+4(-3)-+94

Humid. Range (%RH)

10-98

Humid.Constancy (%RH)

±1.0-±3

Temp. Constancy (℃)

±0.1-±0.3

Temp. Homogeneity (℃)

±0.5-±2.0

Temp and Humid Max.Thermal Compensation (W)

500

PowerAC380V±10%,50HZ,3/N/PE

Humidity test chamber Optional Accessories:

Independent sensors for specimen protection(NE60519-2.1993

1 Entry port Φ100mm

Drier filter for compressing air

Automatic water supply device

Nitrogen gas auxiliary device

Water-Cooled unit

Spare parts package

E-management and cyber software

Video monitor system

APP for mobility management

Standard Version:

3 Power outlets for specimens

Left and right entry ports Φ50mm

Silicon Stoppers for entry ports

2 Stainless steel shelves

1 Water tank with 20L

1 Water filter

 

Structure:

Integral, (the humidity test chamber door direction is in front) front for the studio, the refrigeration unit, after the electric control cabinet and electric control actuator, the main control interface is located in front of the humidity test chamber, the expansion control panel is located in the right side of the humidity test chamber. The door is open in the width direction. At the back of the studio, there are circulating air duct system and air conditioning system: centrifugal fan, air guide, heater, refrigeration heat exchanger, temperature sensing device.

                                       1. Chamber Door                                   2. Observation Window
                                       3. Control Pad                                   4. Working Lights
                                       5. Cable Port                                   6. Extensional control pad
                                       7. Wheels                                   8. Power distribution board

 

Material:
  • Outer chamber material: cold rolled steel plate + double-sided electrostatic spraying process
  • Inner chamber material: SUS304 high-grade stainless steel plate
  • Insulation material: rigid polyurethane foam + aluminum silicate insulation layer

 

The structural strength:
  • Bearing capacity of test chamber floor: ≤120kg (uniform load)
  • Test chamber sample frame bearing capacity: ≤20Kg (uniform load)
  • The total weight of the test box shall not exceed 150kg

 

Heating Mode:

The closed-loop feedback heating control system is composed of temperature sensor, central controller, solid-state relay drive module and heater actuator. Through THE P.I.D control calculation method, the temperature compensation control of the test chamber studio can be carried out in real time and dynamically.

 

 

Core Components:

Hot Products

High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber The humidity test ...
Features ☆ Homogenous temperature linear changing rates: 5℃/min, 10℃/min ☆ Optional remote-assist ...
Climate Chamber Temperature Range -70℃~180℃ Humidity Range 98%Rh 190L/335L/600L/1000L Introducing ...
Patented Solar Simulated Test Chamber German Quality Solar Simulated Test Chamber The solar ...
Solar Simulation Test Chamber with Full-spectrum Full-spectrum solar simulation test chamber can be ...
Customized Sunlight Environmental Temperature Solar Simulation Chamber The solar radiation test ...