Home Companies Guangdong Sanwood Technology Co.,Ltd

PLC Touch Screen Sand And Dust Chamber 2m/S Airflow Dust Ingress Protection

Guangdong Sanwood Technology Co.,Ltd
Active Member

Contact Us

[China] country

Contact name:Nancy Shen

Inquir Now

Guangdong Sanwood Technology Co.,Ltd

PLC Touch Screen Sand And Dust Chamber 2m/S Airflow Dust Ingress Protection

Country/Region china
InquireNow

Product Details

DustProof Test Equipment IEC60529 Sand Dust Climatic Test Chamber

 

 

Dust test chamber, also known as dust test chamber, is based on IEC60529, GB2423.37-89 (test L: dust test method), GB 4208-93 protective bushing level (IP code), GB/T 4942.2-93 (protection of low-voltage electrical appliances Enclosure rating), GB 7000.1-1996, GB 7001-1986 (protective enclosure rating for lamps), DIN40050 and IP5K0. It is mainly used for IP5X and IP6X testing of LED, lamps, automobiles, and electrical enclosures.


Sanwood Sand Dust test chamber structure

1. Cavity material: mirror surface SUS304 stainless steel; cavity internal size: 800x800x800mm;
2. External material of cavity: surface atomized SUS304 stainless steel;
3. Tempered glass observation window.
4. Body insulation filling material: polystyrene foam molding;
5. The circuit system mainly adopts: Schneider relay;
6. Controller: Miki touch screen programming LCD controller
7. Heating system: U-shaped electric heating tube, stainless steel material, power: 2kw;
8. Vacuum device SAP: vacuum pump gas flow rate: 0~6 l/min, 0~2 kpa; vacuum gauge, air filter, centrifugal blower, etc.;

Vibration device: eccentric wheel motor;
9. The diameter of the test hole is 50mm, on the side of the cavity
10. Safety devices: leakage protection, overload fuse protection, fan overheating protection;


Sanwood Sand Dust Test chamber Specifications

ItemSpecification
Internal dimension800W*800D*800Hmm
External dimension1450W*1000D*1700H mm
Chamber materialSUS304 Stainless steel
Specifications of square mesh sieveMesh hole 75um, mesh metal wire diameter 50um
Talcum powder amount2 ~4 kg/ m2
Airflow speedNo more than 2m/s
DoorLeft open door with tempered glass door
Controller

PLC Touch Screen controller, programmable to set as below cycle:

a. Blowing dust time (Stop/Blow) m/s

b. Cycle time: can be adjusted

c. Pre-set test time: 0s ~99m99s

Vacuum systemPressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump
FanCentrifugal fan
Safety protection devicesMeter over-temperature function, Phase shortage protection, Power short-circuit protection
Power supply

Standard: 220V AC, 50Hz single phase 

Options for other countries in the world. 

 

 

Product Catalog:
Dust Test Chamber.pdf
 

Hot Products

Temperature Humidity Test Chamber for Battery Module Environmental testing Sanwood Battery explosion ...
DustProof Test Equipment IEC60529 Sand Dust Climatic Test Chamber Dust test chamber, also known as ...
Sand Environmental Simulation Dustproof test chamber Sand Dust Test chamber Product Description Sand ...
Sand Dust Test Chamber IEC60529 Dustproof Test for enclosure protection Sand Dust Test Chamber, also ...
DustProof Test Equipment IEC60529 Dust Chamber customised size Sand Dust Test Chamber, also named as ...
EN60529 IP5X IP6X Sand Dust Test Chamber Dustproof Test Chamber Sand and dust test chamber, also ...