Active Member
|
[China]
Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Contact name:Doris
ASLi (CHINA) TEST EQUIPMENT CO., LTD |
|
|
Programmable Sand and Dust Test Chamber application:
Sand and dust tester is used for dust test including floating dust and cyclone dust: for all kinds of automobile parts, such as, automobile lamps, meter, safe belt, seat regulator, dirt-proof boot of electrical appliance, lockers etc.
Programmable Sand and Dust Test Chamber features:
1. Adopt strong spray dust device, the user can operate independently for No.1 floating dust, No.2 floating dustt,No.3 floating dust on the gauge panel.
2. Adopt vibration device; spray dust’s density can be the same every time.
3. Precision collection for dust concentration, Can reduce the misestimate concentration because of improper operation
4. Meet DIN, IEC, GB, ISO, JIS standard
5. Control system: be connected with and monitored by computer
6. Convenient design for dust cleaning.
7. Synchronous resonance function to ensure of the uniformity of dust concentration
Model | DT - F | ||
Specimens | Flammable, explosive, easy volatile material sample test; Storage of corrosive substance sample test,biological test and strong electromagnetic emission source sample test are prohibited. | ||
Volume | 1000 L |
| |
Inner Dimension | W1000×H1000×D1000 mm | ||
External Dimension | W1500×H1850×D1400 mm | ||
Weight | 400㎏ | ||
Air Switch | 32A | ||
Power Supply | AC220V 50/60HZ Single Phase Three Lines 6㎡ Copper Wire | ||
Performance Specification | |||
Dust Concentration | 60000mg/cm3 | ||
Metal Net Mesh Standard Diameter | 50um | ||
Diameter between Metal Wires | 75um | ||
Standard Complied | GB2423.37-2006 IEC 60068-2-68-1994 GB4208-2008/IEC60529:2001enclosure protection GJB150.12-2009 sand and dust test method (dust proof test) GB7000-1-2007Enclosure protection besides chapter 9. GB10485 dust test method and JIS,DIN,MIL etc.equivalent test method | ||
Chamber Structure | Inner Material:304# Stainless Steel 1.0mm thickness Outer Material:Cold rolled steel ,1.0mm thickness, and paint coated Control cabinet and testing cabinet are integral Special dust collector | ||
Chamber Door | Single door/Explosion proof handle/Observation Window/Window light/Window dust scraping devices | ||
Observation Window | On the door with dimension 270X360mm | ||
Control Panel | Temperature control,Program control timer,Working indication light,Power switch,Dust blow switch,Dust shaker switch | ||
Mechanical Room | Blowing dust blower,dust blowing outlet | ||
Sample Shelves | Using 304 # stainless steel punching bending mesh, easy operating and the shelves distance adjustable | ||
Power Control Cabinet | Power supply circuit breaker, controller, power distribution panel, cooling fan, over temperature protection, dust shaker motor | ||
Heating System | With scale type heating pipe,P.I.D. Control heating thus achieve temperature balance | ||
Dust Blowing Method | With high speed blower blowing the dust to the test chamber | ||
Dust Shaking Method | With vibration motor recollecting the dust on the inner chamber to the dust collector. | ||
Electrical Control System | |||
Controller | Imported LCD touch screen temperature controller (Korea TEMI880) Control temperature, dust blowing time, dust float time separately. Dust shake, stop time and cycle time control etc. | ||
Program Capacity | Available Program : Max.120 group,one program consist of 1~99 segments Available Memory Capacity: 1200 segments,repeatable: | ||
Communication | RS-232 Communication interface,which can be as monitor or remote control system, testing recorder. | ||
Running Method | Program mode / fixed value mode | ||
Setting Method | Touch screen, English and Chinese language available | ||
Setting Range | ±5℃ of Max.Temperature | ||
Display Resolution | Temp.:0.01℃； Time: 1min; | ||
Power off memory function | Power off recovery mode can be set : hot start/cold start/stop | ||
Preset Start Function | Starting time can be set freely, machine automatically running when time reached after turn on the power. | ||
Curve Recording Function | With battery protection RAM,can save equipment set data,sampling value and sampling time; Max. Recording time 60 days (when the sampling cycle with 1.5min) | ||
Safety Protection Device | |||
Testing Chamber | Over temperature ,fan/ motor overheating relay. | ||
Power | Electric leakage, overload and short circuit protection | ||
Documents:Technical Parameters,Quality Card,Operating Manual,Warranty Card etc. | |||
