Aluminum Alloy Disposable Ceiling Module HEPA 99.99% Class 100
Features:
1. Closed construction, the disposable ceiling module is a whole
closed design, every product will be tested before leave the
factory that there is no leakage from air inlet side to outlet
side. The end cover between side frame is sealed by polyurethane
and glass cement to prevent leakage.
- Small size, the disposable ceiling module is relatively smaller
than fan filter unit, the thickness is thinner, and lighter. Frame
is made of aluminum alloy, elegant appearance and very easily to
transport as well as installation.
- The disposable ceiling module is fireproof to UL B1 standard.
- Heat insulation, to make sure the ventilation air keep temperature,
there are 10mm thickness heat insulation layer covering on the
frame.
- Air inlet connection size 350mm, 300mm, 250mm adjustable,
customized connection also available.
How to install the disposable ceiling module ?
- The disposable ceiling module can be installed on the ceiling grid
or color plate gird.
- To increase the service life of ceiling module, before
installation, the cleanroom should be cleaned by airflow for a long
time blow until the cleanliness level is workable. This process can
remove large dust particles in ventilation tunnel, room and so on.
- To increase the service life, at least F8 efficiency medium filter
such as multiply pocket filter and v bank filter is required.