|
[China]
Trade Verify
Address: Block 1#, Shuangxin Economic Park, Xuelang, Wuxi City, Jiangsu Province, China.
Contact name:Ada
Wuxi Lenge Purification Equipments Co., Ltd. |
|
Verified Suppliers
|
|
|
Laminar Airflow Trolley Clean Room Equipments With 2 - 4 Hours UPS
Laminar Flow Horizontal or Vertical Trolleys are used for the
storage and the transfer of products that are sensitive to
contamination, between two classified areas, generally separated by
autoclaves. The trolleys are fitted with an independent power
supply which keeps the laminar flow constant at any time.
Standard Size and Parameters:
| Model | Overall size L×W×H | Work size L×W×H | pstream Rated air velocity (m/s) | Working area clean class | Power (kw) |
| LUFT8-072058 | 800×600×1800 | 720×580×750 | 0.45±20% | Class A | 0.4 |
| LUFT10-092058 | 1000×600×1800 | 920×580×750 | 0.4 | ||
| LUFT14-112068 | 1200×700×1800 | 1120×680×750 | 0.5 |
Note: specifications listed in below table are only for customers' reference. It is mostly designed and manufactured according to customers' URS.
Characteristics and Features:
Product transfers under aseptic conditions.
Unidirectional flow; vertical or horizontal.
HEPA gel sealed design.
Technical Specification:
Housing: Body structure fully made in stainless steel SUS304 press-bent metal sheets.
Filter: G4 pre-filter and H14 HEPA filter
Ventilation provided by energy efficiency low power consumption motor blower.
Power supply: Dry battery UPS recovery pack with theoretical battery duration of 2-4 hours starting from full charge status.
Dop Port: DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test.
Mobility: Pivoting (360°) castors with brakes.
Product schematic diagram:
Purification equipment generally refers to the products which can remove the particles which is 0.3um or above 0.1um to improve the local cleanliness. Its key point is to maintain local high cleanliness, and the specification or size is also determined by the required scope of protection. Personalized design can be carried out according to the actual needs of customers, such as system control, parameter monitoring, operation mode and so on.
