Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Electronic Tablet PC Lvds Connectors 1mm Crimp Style , White Color 30 Pin Connector

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

Inquir Now

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Electronic Tablet PC Lvds Connectors 1mm Crimp Style , White Color 30 Pin Connector

Country/Region china
City & Province shenzhen guangdong
Categories Wiring Harness
InquireNow

Product Details

1, Product specification

 

  Basic size information
Colorwhite
Pitch1.0mm
Terminal insulation O.D.0.60mm(max)
Terminal materialphosphor bronze
Finish terminalgold-flash
Position30 pins
Wire rangeAWG#30 to #34
 
                                                          Electrical properties
Current Rating1A AC, DC
Voltage Rating200V AC, DC
Contact Resistance40mΩ Max
Insulation Resistance100mΩ 
Withstanding Voltage500V AC/minute
 
                                                          Mechanical properties
Temperature range-25℃ to 85 ℃

 

 

2, Related drawing and report

The below engineering drawing and testing report is for your reference, it's no doubt that it can help you to get right parts for your device. 

 

5. Mechanical Performance

Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
AWG#340.3kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.40kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 80mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

 

 

6. Environmental Performance And Others

 

Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

Insulation Resistance 10MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

 

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
202.600.60
304.000.76

 

 


3, The product application scope

This product are widely fixed in household appliance, computer, telecommunication device. Our parts are accepted by famouse and international company like TPV, Emerson, Amphenol Corporation, LuXshare, BYD etc because of its' low defective rate. And the all products are approved by REACH, UL, RoHS internation standard. Some parts are halogen free to protect the green world.

 

 

4, Our  intimate service for you

 

We can offer you all kind of intimate service like prompt samples, fast delivery and flexible payment way.

 

 

Hot Products

Dual row housing with pitch 3.0mm wire to wire connector female connector Nylon material 1, Detailed ...
Housing Electrical wafer connector 2.0 mm Matched With PBT Materials C2003HM 1, Specification excel ...
Female housing Wire to wire Connector Pitch 3.0mm for power dual Row 5. introduction Pitch3.0mm, ...
1, Product specification Basic size information Color white Pitch 1.0mm Terminal insulation O.D. 0...
1, Detailed form of product specification Basic size information Color Grey Pitch 1.25mm Row Single ...
2.0mm Pitch Wire To Board Crimp Style Connectors Dual Row Without Lock 1, Detailed product feature ...