Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

AWG 20# & 16# Wire Harness Assembly with SAN Connectors Red / Black / Yellow

Contact Us

[China]

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

AWG 20# & 16# Wire Harness Assembly with SAN Connectors Red / Black / Yellow

Country/Region	china
City & Province	shenzhen guangdong
Categories	Wiring Harness

Product Details

wire harnesses with SAN connectors board-in connector wire to board wire harnesses

Product Description

Item name	Automobile application custom wire harness&cable assembly
Application	Electronic, Car & Motor, Vehicles, Home application etc
Samples	Free samples available
Costom & OEM	Drawings/pictures/samples are required
Inspection	All goods are 100% inspected before delivery
Service	wire & cable making, engineering design support, splicing, wire & cable strip & crimp
Shipping & delivery	By International Express: FEDEX/DHL/UPS/TNT;By air; By sea
Lead time	3~10 working days after payment
Certification	ISO 9001:2008 & RoHS, UL, Reach

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force to P.C.B	Insert and withdraw at the speed rate of 25±3mm / minute to P.C.Board. (Per single circuit,Initial)	Insertion	1.0kgf max.
			Withdrawal	0.1kgf min
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#24	3.0kgf (Min)
			AWG#26	2.0kgf (Min)
			AWG#28	1.0kgf (Min)
			AWG#30	0.8kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	1.00kgf (Min.)
5-5	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 10mΩ (Max.)
5-6	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 10mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-7	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 10mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 10mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 10mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 10mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed world, delivery by Fed x/UPS/DHL is normally 3-5 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in bags, tube, pipe, plated & carton

We can produce series of wire harnesses:

1.Automotive,Motocycle,Bus,Bike,Truck wire cable assembly
2.Electrical cable and wire harness
3.Audio,Video,Radio cable and iso wire harness
4.Industrial wire cable harness
5.Home appliance wire harness
6.Fuse wire ,game machine wire harness
7.Power,LVDs,Flat RCA,USB cable harness
8.Control and panel wiring cable assemblies
9.Medical equipment cable and harness
10.Airplane models wire harness

1.Automotive,Motocycle,Bus,Bike,Truck wire cable assembly

2.Electrical cable and wire harness

3.Audio,Video,Radio cable and iso wire harness

4.Industrial wire cable harness

5.Home appliance wire harness

6.Fuse wire ,game machine wire harness

7.Power,LVDs,Flat RCA,USB cable harness

8.Control and panel wiring cable assemblies

9.Medical equipment cable and harness

10.Airplane models wire harness

Hot Products

Motocycle / Automotive Wire Harness Assembly With 51005 Connector

wire harnesses with 51005 connector for automobile car cables wire to wire cables Product Descriptio...

AWG 20# & 16# Wire Harness Assembly with SAN Connectors Red / Black / Yellow

wire harnesses with SAN connectors board-in connector wire to board wire harnesses Product ...

Wire To Board Wire Assembly With 2.0mm pitch YH SMH200 connectors tinned contact

wire harness wire to board wire assembly with 2.0mm pitch YH SMH200 connectors Product Description ...

200mm Length LCD Wire Harness Assembly 2.00mm Pitch PHD Connector Replacement

2.00mm Pitch PHD Connector Replacement Wire Harnesses with 150mm Length for LCD Descriptions of ...

TE Connector Replacement Wire Harness Assembly For Car Wires Audio System

Wire Harnesses With TE connector replacement Wire Assembly for car wires audio system Product ...

Wire To Board Type Wire Harness JST PH Connector Alternatives For TV , Computor , LCP , LED

wire harness wire to board type JST PH connector alternatives for TV, computor, LCP, LED Product ...

Related Products