Active Member
|
[China]
Address: 8F Tiantyuan BLD No.9 Jiefang Road,Haishu,Ningbo China
Contact name:Tony
NINGBO GOODLUCK PRECISION MFG.CO |
|
Flat KN95 N95 Face Mask Making Machine With Melt Blown Nonwoven Material
This production line realizes the fully automatic production of N95 mask, mainly including coil feeding, nasal bridge tendon feeding, ultrasonic pressing, ear feeding and welding, folding and pressing, mask pre-cutting, finished product cutting and other processes, completing the entire production process from raw materials to finished products.The equipment of our company can increase the size of automatic make-up mask by machine vision to ensure the yield.The N95 mask is comfortable to wear and has a good filtering effect, suitable for all face types. The filtration efficiency of the N95 mask for particles with aerodynamic diameter ≥0.3 m is more than 95%, which can effectively prevent airborne microbial infection, effectively protect health care workers and ordinary people, and the protective effect is far better than ordinary planar mask.
Equipment installation and configuration requirements
(1) Equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);
(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;
(3) Equipment weight: ≤ 5000kg, ground bearing ≤ 500kg / m2;
(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 9kw;
(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;
(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).
System Construction
| NO | Part Name | Unit | Remark |
| 1 | Filter cloth / filter cotton / water absorption layer unwinding mechanism | 3 | |
| 2 | Nose strip unwinding mechanism | 1 | |
| 3 | Bridge straightening mechanism | 1 | Width 3-7mm |
| 4 | Driving and cutting mechanism of nose beam | 1 | Width 3-7mm |
| 5 | Fabric folding mechanism | 1 | |
| 6 | Rolling welding edge sealing mechanism | 1 | Double edge |
| 7 | Cloth driving mechanism | 2 | |
| 8 | Fabric folding mechanism | 2 | |
| 9 | Roll welding side seam mechanism | 1 | |
| 10 | Rolling mechanism | 1 | |
| 11 | Transfer line | 3 | |
| 12 | Shunt mechanism | 2 | |
| 13 | Ear band welding machine mechanism | 2 | |
| 14 | Blanking line | 2 | |
| 15 | operating system | 1 | |
| 16 | operation panel | 1 |
Suitable Raw Materials
| Item | Axis | Width (mm) | Roll out diameter(mm) | Roll Inner Diameter(mm) | Weight |
| Cloth | 3 | 170~200 | Φ600 | Φ76.2 | Max 15kg |
| Nose Strip | 1 | 3-7 | Φ400 | Φ76.2 | Max 25kg |
| Ear Belt | 4 | 3 | —— | —— | —— |
Production Standard size:175*95mm
Production Capacity :
(1) Production Efficiency : 100-110ppm；
(2) Qualified rate of equipment production: 99% (except that the incoming materials do not meet the requirements and the employees do not operate properly)
(3) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)
Machine system Overlook
FAQ
1. Q: Can you provide overseas services?
A: Engineers who can serve overseas.
2. Q: How to use the machine?
A: Before sending the packaging machine to you, we will install it and test it, and then pack the whole device in a wooden box, so you do n’t need to install it again,
3. Q: Test packaging Before shipment?
A: we will surely 100% of the experimental test machine will be normal without problems.
4. Q: What is the warranty period?
A: One year warranty for the whole machine.
5. Q: What is the payment term?
A: Accept L / C or TT.
6. Q: What is the delivery time?
A: 15-20 days after receiving the deposit. Contact: 7 * 24 hours online service If you need to pack other materials / products or have any questions about the packaging machine, please feel free to email me or call us.
