Cover material feeding
Transferred to the glue application roller by a precision gripper;
Prevent scratches by side air-blowing device;
Achieve non-stop cover loading, improve efficiency;

Board feeding
Transferred by pusher, it solves the problem that the case spine (width less than 6.5mm) easily falls off and unalignment, which results in a higher yield rate of finished cases

Board & cover register
Board and cover are combined in continuous rotary motion in perfect register;
The tolerance range of the register is 0.2-0.5mm; While that of a regular case maker has a range of 0.5-1.0mm

Corner tucking station
also a feature of making round corner cases

Auto job changeover

Use Siemens human-machine interface system;
One-click for finishing job changeover in as fast as 15 minutes;
Be competent in handling diverse and small-batch orders;
Most easy access for fast changeover/cleanup;
Friendly for operators to operate HX60 PLUS;

Hotmelt and cold glue station
Hot melt for cover lining;
Inside lining with cold glue.

Non-symmetric cases making

By adjusting brush-covered folding bars, easy and fast;
No need for additional customized molds, save lots of your cost than you can imagine.

Brush-covered folding bar

Ensure tight, accurate folds;
With the pressing process for bubble-free gluing

Case transporting
Transferred by a lifting transport;
The cover surface is free from scratches;
Prevent the glue from squeezing out at all case fold sides.

Counter stacker

The cases are transported through the final pressing station to a counter stacker, delivering piles of finished cases onto a roller conveyor to the operator.