Active Member
|
[China]
Address: No.322 East Zhongshan Road, Shijiazhuang,China
Contact name:Peter
Shijiazhuang Zhongtai Pipe Technology Development Co., Ltd |
|
|
SS CS GI MS Pipe Fabrication Making Machine ERW89 Pipe Mill/Tube Mill
Used In Building Field For Automatic Square Pipe Roll Forming ERW Tube Mill
Summary of welding pipe machine
The welding pipe machine can be recommended from coil hanging to pipe packaging, which consisted of complete pipe mill, rotating capstan,single or double decoiler, staightener,shear&end welder,accumulator,pipe mill section,flying saw and packaging.
The welding pipe machine is mainly used to produce tube for heat exchanger,refrigerator, frame of car,bicycle ect,fitness equipment,furniture,chiller,petrol transmission and so on.
What is the Features of welding pipe machine?
1.It supports many kinds of material like carbon steel, GI and others.
2.One welding pipe machine could make a large range of pipe sizes by changing mold.
3.One welding pipe machine could be used to make square pipe, round pipe by changing mold.
4.The pipe made by this kind of welding pipe machine could be used in many areas like water tube, wire pipe and others
What is the working flow of welding pipe machine?
Steel Tape→→ Double-head uncoiler →→Strip-head Cutter and welder→→Spiral accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External and internal burr→→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
What is the specifications of welding pipe machine?
| name | welding pipe machine |
| a) Steel Pipe Specification | |
| Pipe diameter: | Ø16–Ø50mm |
| Pipe Thickness: | 0.5– 2.5mm |
| Square Pipe: | 14X14mm –40X40mm |
| Rectangle Pipe: | 10X20mm –40X50mm |
| Pipe Thickness: | 0.5–2.0mm |
| Pipe Length: | 6-9m |
| Length Tolerance: | 0-3mm |
| b) Steel Tape Specification | |
| Material: | Low Carbon steel (δb≤500Mpa, δs≤235Mpa) |
| Steel Tape: | |
| Inner diameter: | Φ580-Φ610mm |
| Outer diameter: | Φ900-1500mm |
| Strip steel width: | 60mm-200mm |
| Strip steel thickness | 0.5mm-2.5mm |
| The maximum weight: | 3.0 tons |
| c) Electricity | |
| Dynamic power: | AC380V±10%, 3phases, 50Hz±10% |
| Control Power: | AC220V±10%, one phase, 50Hz ±10% |
| Electric installed capacity: | appro 450KW |
| e) Cooling water | |
| Reservoir for High Frequency equipment: | 15 m³, one set |
| Reservoir for circulating cooling water: | 15 m³, one set |
| f) Compressed air | |
| Pressure: | 0.4Mpa |
| Flow: | 0.5m3/h |
| g) Line speed: | 30-90m/min |
Company Profie
Zhongtai Group is established in 2000, locates in Shijiazhuang. We are an IS09001 certified pipe making machine and cold rolled section steel forming machine manufacturer, reputed enterprise in China's pipe making industry with the largest production capacity, the most advanced technology and strongest competitiveness,one of the executive directors of China Cold-formed Steel Structure Association and one of China's top ten pipe making machinery brands. There are three subsidiary companies respectively carry out technology development, production processing and mold manufacturing. Plant area 67000 m, with machining, heat treatment and assembly plants.
Factory Tour
Trade Show
ZTZG Transport
FAQ
Q:Are you manufacturer?
A:Yes,we are manufacturer.We have our own technical team.Welcome to
visit us.
Q:What kind o f payment term you can do?
A:We are flexible about payment terms,we can also help you on
financing,please contact us for details.
Q:What info you need before you make the proposal?
A:The pipe diameter and thickness range which you need or the
profile drawings, material information,your special requirements.
Q: What should I do if I just start a new business?
A:Contact us immediately ,we provide free consultant pre-sales
service.Also we can help you to solve the material(steel coil)purchase,worker
train,international market price.
Q:How do you do QA?
A:We have special team do strict QA,this is our strengths:
(1)Every gear box will be tested for 8 hours with oil inside to
guarantee there is no
leak.
(2)Every shaft will be inspected for the centering jumpiness.
(3)Every roller will be checked to make sure its in the range of
tolerance critical parts
will be inspected for all dimensions.
Q:Why I should choose you,what are the differences between you and
other
Chinese suppliers?
A:We are concentrate on this area for more than ten years.
Pre-sale:If the customer can not provide detailed technical information,our engineer
will go to the customer’s plant,draw precise drawings after measuring unit,to meet
your production requirement.
After-sale:Our strong team of engineers and experienced technicians can provide
you with installation instructions,operating instructions,quality control guidance
