|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Machine features and advantages:
· With Vision system need to connect with an external PC with windows7 system and USB port.
· With closed loop control. can move more faster and smoothly
· with 58pcs feeders, more effective
· with 8 kinds of different nozzles, can place with 0201, 0402. 0603, 0805-505etc, and QFN, SOP, LQFP. all kinds of IC. and diode, triode.
· with Z axis detection can self-checking the height and angle during placement. can make sure this machine work well with various kinds of components.
· We can supply English machine operation manual and technical support. Please be confident to make the purchase.
| CHM-T36VB Specifications | |
| Dimensions | 1310mm(L)×710mm(W)×340mm(H) |
| Weight | 50kg |
| Power Supply | AC220V (50Hz, single phase) /AC110V (60Hz, single phase); |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed | 6000cph(optimal without vision detection); |
| Control Accuracy | 0.025mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | External computer required (Windows) |
| Drive System | X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt+polished rod+Linear Guides |
| Feeding System | 58 tape feeding stacks(8mm:44,12mm:8,16mm:4,24mm:2；customization supported), 14 preset general IC stacks, work surface custom IC trays and stick feeder supported |
| Vision System | Up-looking camera for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
(1) PCB clamping area: fixing the PCB, let PCB close to left, top
spring should be compacted.
(2) Up camera: Used for calibrating the components position, angle,
so as to improve placement accuracy.
(3) IC material stack: used for place the big IC.
(4) Emergency stop switch: Emergency stop after press down, machine
normal work when clockwise rotation and bounce.
(5) IC tray area: Used for fixing IC tray.
(6) Nozzle & Pull needle: Nozzle used for absorbing materials
and mount on PCB, pull needle used for pull the material go ahead.
(7) Down camera: Used for observing and location, and PCB MARK auto
adjust.
(8) Ordinary material stack : Place tape packaging materials.
(9) Belt receiving wheel : Used for collecting film.
(10)Tape placing area : Used for placing tape.
FAQ
1. Whether the linear guide rail and round rod have an impact on
the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no
effect on the accuracy of the mounting machine, the precision of
the mounting machine depends on the motor and software control
system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently
developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports
cross-platform hardware support, rich software support, reliable
security and stability.
3. Do you use electromagnetic coil to control the pulling needles?
What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic
coil. Comparing with the cylinder control, the electromagnetic coil
control has the characteristics of faster response, softer force
and less noise. The quick reaction can speed up the mounting speed;
Soft strength refers to the strength of the pull needle is soft
when pressing down, and the pull needle is not easy to break.
If you have any question,please feel free to contact me!
Tel:+86 18100733752/0731-85504084
Email:sales@charmhigh.com
Skype/WhatsApp/WeChat ID :+86 18100733752
website:Http://en.charmhigh.com
