Shaanxi Kairuihongxing Electronic Co., Ltd. |
Verified Suppliers
|
|
Corona Discharge Ceramic Ozone Generator 3.5g
Description
Ozone Output: 3.5 g/hr
Enter Voltage: AC220V / DC12V
Output Voltage: greater than 3kv
Energy Consumption:45W(220V)/ 37.5W(12V)
Ceramic measurement: 90mm*50mm*1.0(1pcs)
Size of ozone transformer: 145mm*55mm*41mm
Fuel Feeding: Dry Air or Oxygen
Ozone Producing Technique: Corona Discharge
Cooling Technique: Ambient Air Cooling
Options
Transportable, straightforward for skilled DIY use.
Low energy consumption
Protected, quiet and environment friendly.
Eliminates odors, Freshens stale air.
For automobile and residential use.
Test conditions:
1. Feed Gas: Dry air or oxygen source recommendated
2. Ambient temperature: ≤10℃, Humidity: <10% (Different
temperature and humidity in the environment will affect the ozone
output and concentration.)
Application
It is used in household air purifier, air fresher, home air purifier, Dryer, dishwasher, shoe cabinet, household disinfectant cabinet, oxygen bar, dehumidifier, refrigerator, domestic appliance and so on.
Attention must be paid to the following:
1 Cooling method: Air cooling for transformer and ceramic plate.
2 When ozone generators work, it is necessary to have cooling fans
to blow the ceramic plates and ozone power supplies. When
installing the power supply, please make sure there is 2-3cm high
space between its bottom and the fixed board, so that heat on the
bottom of the power supply can be radiated quickly.
3 This is a high voltage product. Do not touch it when it is
working.
4 Usually after ozone sterilization, it needs 20-30 minutes to
diffuse ozone before anyone enters. And only when the ozone
concentration is or below 0.15ppm, it is permitted to enter.
5 The ozone output test data is based on 95% pure oxygen feeding
and dew point -45°. Different temperature and humidity in the
environment will affect the ozone output and concentration.
6 This item can work continuously for 20~30 minutes with air
cooling. If it continues to work without any rest, the ozone output
will decrease by degrees because ceramic plates are overheated.
7 When two high voltage wires are very close to each other,
especially under moist circumstances or they touch, the wires will
make a light and possibly lead that the insulation becomes
discoloured even melts. The way to avoid this matter is to keep the
two high voltage wires parallel or separate, at least untouched.
8 Usually when ozone generator is used for test, it will be better
if the interval time between two tests is one minute. It is because
the output voltage and start-up electric current is very very high,
if it is started up and closed down frequently within several
minutes, power supply is possible to be burned due to instant or
instantaneous high current.
9 Deoxidized materials or objects should not be contacted with
ozone for a long time.
Package
First, the products are packed in small cartons and then packed in large cartons. The quantity of a whole carton is 32set, which can be made according to the customer's requirements. The quantity is different and the weight is different. Then, the products are packed and fixed with automatic packing machine.
Company profile
Shaanxi KairuiHongxing Electronic Co.,Ltd is a professional domestic and foreign trade, production and sales integration of companies, we produce all types of ceramic igniters, ozone generator ceramic plate and iqos heating plate.
Our company was established in 2007, have many years of history in the ceramic heating industry,it can also be in accordance with the requirements of the project put forward by your company, by our professional team which will set the stature for you do not trouble back at home of the one-stop service from designation installation and debugging to production. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe. At the same time we has obtained ISO9000, CE, ROHS certificate.
If you are interested of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.