|
[China]
Trade Verify
Address: Floor 3rd, Building 12th, No.100th, Dongwei Road, Dongjing Town, Songjiang area ,Shanghai China
Contact name:Derek Yu
Shanghai Xinyu Packaging Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
LPG300 Centrifigural Spray Dryer
Equipment design conditions
Name of material:
Solid content:About 45-50%
Final moisture content:≤5%
Inlet air temperature:180-200℃
Exhaust temperature:90-100℃
Rotating speed frequency:40-50HZ
Drying tower diameter:ф4600 mm
The atmospheric pressure: 760mmHg
Ambient temperature:25℃
Absolute humidity:90%
Power supply:380V,3Phase,50hz
Working principle and Design Scheme of equipment
1, Operational principle
The machine is open circulation, flow, centrifugal atomization, micro negative pressure operation. Drying medium air from the atmosphere according to operating instructions, after the initial, medium effect air filter, blower, hot stove, The high efficiency filter becomes high temperature and clean hot air, then enters the main drying tower through the hot air distributor. The liquid material passes through the screw pump according to the operation instruction and enters the centrifugal nozzle. The droplets are dispersed into small droplets under centrifugal force. In the main drying tower, the droplets are in full contact with the hot air, heat exchanged along their specific paths, then dried into products, then separated by a cyclone separator, and the solid materials are collected. The gas medium is filtered out.
2, Description of design scheme:
Initial selection:LPG-300 type(ф4600)spray dryer,
Heating system:Oil-fired hot air stove for 500,000 calories heating
Product collection system:tower bottom+Cyclone separation+Water film dust removal
Circulatory system: open circulation of draft fan
Air filtration system:Primary, medium effect high temperature resistant and high efficiency air filter
Feed system: Nemo pump stepless adjustable feed
Collection system: star-shaped discharge valve
Control system: frequency conversion adjust the speed of atomizer, digital display instrument temperature, pressure, pressure difference, touch screen display workflow / plc fuzzy control variable parameters and so on.
Equipment technical parameter table
| Water evaporation | 300Kg/h(max) | Tower diameter/tower height | 4.60M/10.5M |
| Operating temperature | Inlet Temperature 200℃/Outlet Temperature 90℃ | Atomizer LPG-300 | Speed:14000r.p.m Diameter:180mm |
| Power | Drive 70KW | ||
| Oil consumption | 50-60kg/h | System heat | 50X104Kcal/h |
| Pressure air consumption | 0.5m3/min | System air volume | About 12000 m3/h |
| Drying system type | Open circulation system | Feeding mode | Automatic screw pump stable feeding | ||
| Hot air contact mode | Parallel flow mode | Heat source mode | Oil-fired hot air stove | ||
| Product collection mode | Cyclone+water film | Atomization mode | Centrifugal atomization | ||
| Control mode | Arbitrary setting, automatic control of inlet air temperature, digital display temperature, pressure, pressure difference, frequency conversion to adjust atomization speed, etc. Touch screen display work flow / PLC fuzzy control variable parameters and so on | ||||
| Overall Size | See the ref picture | Weight | 12T | ||
| Environment condition | Full pressure:760mmHg,Temperature200C,Relative humidity:80% | Electric source | 3Phase,380V,50HZ | ||
Process flow diagram
