|
[China]
Trade Verify
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
Verified Suppliers
|
|
|
Classic Pump for Hreavy Duty Slurry used for Fine Tailings made of High Chrome Alloy Cr27%
Introduction:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Grey cast iron fully lined casing provides durability, strength, safety and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve manimum wear life and low operating costs.
Large open internal passages designed to reduce internal velocities manimise wear life and lower operating costs.
Heavy duty slurry pumps are specially designed for heavy sludge and slurries in the mining, minerals processing industry. Generally speaking, heavy duty slurry pumps can handle with big flowrate, but not quite high discharge head.
SH/250ST(12/10ST-) is high discharge head slurry pumps which is horizontal cantilevered centrifugal pump.
series slurry pumps have been designed for the handing of highly abrasive or corrosive high density slurry, which are widely used in mineral processing, fine primary mill grinding, chemical slurry service, tailings, secondary grinding, in-plant processes, sand and gravel, coal preparation.
Specifications:
| Model | SH/250ST |
| Oulet | 10-inch |
| Capacity | 936-1980m3/h |
| TDH | 7-68m |
| Rated Motor Power | 560Kw |
| Speed | 300-800r/min |
| NPSH | 6m |
Construction of SH Slurry Pumps:
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Performance Curve:
| SH Series Metal Lined Heavy Duty Slurry Pump Specifications & Prices | ||||||||||||
| Pump Model | S×D (inch) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | Pricing | ||||||
| Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | NPSH (m) | No. of Vanes | Vane Dia. (mm) | Weight (kg) | |||||
| Impeller | m3/h | l/s | ||||||||||
| SH/25B | 1.5×1 | 15 | Metal (A05) | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 | 91 |
| SH/40B | 2×1.5 | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 | 118 | ||
| SH/50C | 3×2 | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 | 191 | ||
| SH/75C | 4×3 | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 | 263 | ||
| SH/75D | 4×3 | 60 | 245 | 363 | ||||||||
| SH/100D | 6×4 | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 | 626 | ||
| SH/100E | 6×4 | 120 | 365 | 728 | ||||||||
| SH/150E | 8×6 | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 | 1473 | ||
| SH/150F | 8×6 | 260 | 510 | 1496 | ||||||||
| SH/150R | 8×6 | 300 | 510 | 1655 | ||||||||
| SH/200F | 10×8 | 260 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3193 | ||
| SH/200ST | 10×8 | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3750 | ||
| SH/250F | 12×10 | 260 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 3760 | ||
| SH/250ST | 12×10 | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 4318 | ||
| SH/300ST | 14×12 | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 | 6409 | ||
| SH/350TU | 16×14 | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 | 10000 | ||
