Active Member
|
[China]
Contact name:
Shijiazhuang Shiza Pump Industry Co.,Ltd. |
|
|
Product overview
Product features: This series of pumps can transport all kinds of
solid-liquid abrasive slurry within 80 °C temperature or used as
pump for various types of filter presses, such as non-ferrous
metals such as zinc, copper, cobalt, nickel and manganese. The
filter press with the wet smelting process is equipped with a pump
or process pump, the slurry pump in the process of coal dressing,
non-metallic mineral processing (titanium dioxide, kaolin, etc.),
sludge and waste slag in the environmental protection industry.
Pump, pressure filter pump or pressure transfer pump in the
production process.
Structure: ZJ series slurry pump is a wear-resistant and
energy-saving slurry pump. Adopting the internationally advanced
design theory and designing according to the principle of minimum
loss, the shape of the flow-through component and the flow state of
the slurry are ideal.
Material: The over-current component is made of high-hard
wear-resistant cast iron alloy, which has high wear resistance,
corrosion resistance, high strength and impact resistance, and
improves service life. The power is reduced, the university seals,
and the slurry is not easy to leak.
Transmission form: It has direct transmission, belt, hydraulic,
frequency conversion and other transmission modes.
Main features
1. Use of inner and outer double layer metal structure.
2. Casing middle split vertically.
3. Discharge port can be positioned at 8 different positions at an interval of 45°.
4. Depending on design of bearing housing, bearing lubrication can be :
5. Thin oil lubrication for box type.
6. Grease lubrication for cylinder type.
7. Thin oil or grease lubrication for bearing housing with inserted cover.
Specification
| Model | 100ZJ-B42 |
| Allowable Max.Power | 90 KW |
| Capacity | 83-365 m³/h |
| Head | 12.7 - 66.8 m |
| Speed | 700-1480 r/min |
| Max.Eff. | 71.6 m |
| NPSH | 2.5m |
| Particle Max.Size Handled Occasionally | 40 mm |
| Pump Weight | 1085 kg |
Performance table
| MODEL | Parameter | ||||||||||
| TYPE | Capacity | Head | Speed | NPSHr | Efficiency | Shaft Power | Matingmotor | Weight | Dia.ofpump | ||
| Q | H | n | (m) | P | (kg) | (mm) | |||||
| (m3/h) | (m) | (r/min) | (%) | (kw) | Power | Specif | Inlet | Outlet | |||
| (kw) | |||||||||||
| 40ZJ-I-A17 | 9 | 44.6 | 2900 | 4.5 | 33.2 | 3.3 | 5.5 | Y132S1-2 | 230 | 40 | 40 |
| 18 | 45.7 | 49.5 | 4.2 | 7.5 | Y132S2-2 | ||||||
| 23 | 39.3 | 52.4 | 4.7 | 7.5 | Y132S2-2 | ||||||
| 40ZJ-I-A17 | 4 | 10.3 | 1400 | 2.5 | 33.2 | 0.3 | 0.55 | Y801-4 | 230 | 40 | 40 |
| 9 | 9.9 | 49.5 | 0.5 | 1.1 | Y90S-4 | ||||||
| 11 | 9.1 | 52.4 | 0.5 | 1.1 | Y90S-4 | ||||||
| 50ZJ-I-A33 | 26 | 42.5 | 1480 | 6 | 32.8 | 9.2 | 15 | Y160L-4 | 680 | 80 | 50 |
| 40 | 40 | 40.6 | 10.7 | 18.5 | Y180M-4 | ||||||
| 54 | 34.5 | 41.4 | 12.3 | 18.5 | Y180M-4 | ||||||
| 50ZJ-I-A33 | 17 | 17.9 | 960 | 2.9 | 32.8 | 2.5 | 4 | Y132M1-6 | 680 | 80 | 50 |
| 26 | 16.8 | 40.6 | 2.9 | 5.5 | Y132M2-6 | ||||||
| 35 | 14.5 | 41.4 | 3.3 | 5.5 | Y132M2-6 | ||||||
| 50ZJ-I-A46 | 48 | 85.8 | 1480 | 2.9 | 32.2 | 34.8 | 45 | Y225M-4 | 690 | 80 | 50 |
| 77 | 82.3 | 41.6 | 41.4 | 55 | Y250M-4 | ||||||
| 94 | 79.9 | 44.7 | 45.8 | 55 | Y250M-4 | ||||||
| 50ZJ-I-A46 | 31 | 36.9 | 970 | 1.4 | 32.3 | 9.7 | 15 | Y180L-6 | 690 | 80 | 50 |
| 50 | 35.4 | 41.7 | 11.6 | 15 | Y180L-6 | ||||||
| 62 | 34.3 | 44.7 | 13 | 18.5 | Y200L1-6 | ||||||
| 50ZJ-I-A50 | 57 | 110.7 | 1480 | 3.8 | 33.9 | 50.7 | 75 | Y280S-4 | 1078 | 80 | 50 |
| 91 | 105.5 | 43 | 60.8 | 75 | Y280S-4 | ||||||
| 111 | 99.8 | 45.1 | 66.9 | 90 | Y280M-4 | ||||||
| 50ZJ-I-A50 | 38 | 48.5 | 980 | 3 | 33.9 | 14.8 | 22 | Y200L2-6 | 1078 | 80 | 50 |
| 60 | 46.3 | 43 | 17.6 | 30 | Y255M-6 | ||||||
| 74 | 43.8 | 45.1 | 19.6 | 30 | Y255M-6 | ||||||
Structural Drawing
