Active Member
|
[China]
Contact name:
Shijiazhuang Shiza Pump Industry Co.,Ltd. |
|
|
TL Series Centrifugal Sludge Pump For Thermal Power Plant 260 ~ 4900m³/H Flow
Quick check
Inlet Diameter:16 ~ 47inches(400~1200mm)
Discharge Diameter: 14~39 inches(350 ~1000mm)
Flow Capacity: 260 ~4900m³/h
Head: 10~75m
Features:
1. CFD flowing simulating analysis technology is adopted for pump
wet parts, with reliable design and high efficiency.2. Adjusting
bearing assembly can change the impeller position in volute,
keeping pump unit in a high efficient operating state.
3. DSC(R) series FGD pumps are of rear side disassembly design,
have a simple structure, and are easy to maintain. No need to
dismantle suction and discharge pipes.
4. Double-row tapered roller bearings are fitted on a pump end,
roller bearing on a drive end. Bearings are lubricated by oil,
improving their working condition and prolonging service life.
5. Mechanical seal is specially designed for cartridge mechanical
seal used in FGD pump process of DSC(R) series FGD pumps with
reliable operation.
Type meaning
600X-TLR
600: Diameter of discharge
X: Bracket Model (bearing lubricating way: diluted oil)
TL: FGD Pump
R: Rubber Liner Code
Samples
600X-TLR: The diameter of discharge: 600mm, bearing lubricating way: diluted oil, Rubber liner.
Application
Fuel gas Desulphurization Pump/FGD system Pump
TDT series axial inhalation single stage single suction centrifugal desulphurization pump can be widely
used to deliver limestone or gypsum grout for fas desulphurization systems of heat-engine plants,
aluminium manufacturers and oil refines. In the grout , the acceptable content of chlorine ion is
60000ppm ,and the acceotable Ph value is between 2.5-13 .
Performance Parameters
| Pump Model | 1000X - TL ( R) |
| Capacity | 10440 m³ / H |
| Head H | 15m |
| Speed | 485r / min |
| Max. eff. | 89 % |
| NPSH | 7.0m |
| Outlet DIa / Inlet Dia | 1000/1200 mm |
| Technical Characteristics | |
| 1 | The wearing parts adopted with CFD (Computational Fluid Dynamics) so as to designed |
| reliability and high efficiency. | |
| 2 | The position of the impeller can be changed by adjusting bearing assembly and the pump |
| unit can be in efficiency operation state. | |
| 3 | Pump is back disassembly type and needn’t dismantle the pipe connection so as to ensure |
| structure is simple and easy to maintain. | |
| 4 | Pump head use double rows taper roller bearings and drive end use cylindrical roller bearings, |
| bearings are lubricated with recycled dilute oil, improved the bearing working condition and | |
| increased service life. | |
| 5 | Mechanical seal adopted with containers type mechanical seal to ensure reliable running. |
| 6 | It is easy to maintain and repair and it is no need dismantling inlet and outlet water pipes. |
