Active Member
|
[China]
Contact name:
Shijiazhuang Shiza Pump Industry Co.,Ltd. |
|
|
Product overview for 100D-L model slurry pump
The L-type light slurry pump is a cantilever and horizontal
double-shell axial suction centrifugal slurry pump. The pump's
discharge port can be installed at a different angle from 45°C and
rotated at eight different angles.
The pump body of the L-type light slurry pump has a replaceable
wear-resistant metal lining, and the over-flow parts such as the
impeller, the sheath and the guard plate are all made of
wear-resistant metal.
Compared with heavy-duty slurry pumps, the pump has high speed,
small volume and light weight, and is suitable for conveying fine
particles, low concentration slurry or corrosive slurry. The weight
concentration of the transport slurry is generally not more than
30%, and can also be used to transport high concentration and low
abrasive slurry.
Type meaning of 100D-L model slurry pump
| Type meaning for 100D-L model slurry pump | |
100D-L(R) | |
| 100 | Diacharge Diameter (mm) |
| D | Support Type |
| L | Light Model Low abrasion slurry pump |
| R | Natural Rubber Liner |
Quality control for 100D-L model slurry pump
| Inspection Equipment | |
| 1. Inspection and Detection | |
| With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials | |
| Complete pump set inspection | |
| We have performance testing platform for each batch pump inspection before delivery | |
| Quality control system for each set slurry pump | |
Purchasing raw material ra | 1. Strict rules and procedures to choose the raw material supplier |
| 2. Each batch raw material will be tested by quality control department | |
C casting of parts
| 1 .Melting:Chemical element analysis for raw material before and after stove . |
| 2.Moulding :Strict sand moulding qualified before iron liquid pouring for casting | |
| 3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. | |
| 1. Self -inspection and inspection between different steps. |
| 2. First part inspection | |
| 3. Procedures inspection | |
| 4..Inspection before storage the mining slurry pumps | |
A Assembling of sl slurry pump | 1. Inspector tracks the whole process of assembly of slurry pumps |
| 2. Slurry Pump pressure inspection and fillout the testing table | |
| 3. Painting inspection | |
| 4. Performance testing and fillout the testing table | |
| 5. Packing inspection of slurry pump | |
| 6. Issue quality certificate | |
L Series Performance Chart
| type | Max. | ClearWaterPerformance | Impeller | Application | |||||
| Capacity | Head/m | Speed/rpm | Efficiency | NPSH | Nos | Diameter | |||
| 20 A-L | 7.5 | 2.34-10.8 | 6-37 | 1400-3000 | 30 | 3.5-8 | 4 | 152.4 | -Ball mill discharge |
| 50 B-L | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
| 75 C-L | 30 | 18-151 | 4-45 | 900-2400 | 57 | 4 | 229 | -Rod mill discharge | |
| 100 D-L | 60 | 50-252 | 7-46 | 800-1800 | 60 | 4 | 305 | -Coal washing | |
| 150 E-L | 120 | 115-486 | 12-51.5 | 800-1500 | 65 | 4 | 381 | -Wet crushers | |
| 200 E-L | 120 | 234-910 | 9.5-40 | 600-1100 | 64 | 4 | 457 | -Phosphate matrix | |
| 250 F-L | 120 | 396-1425 | 500-800 | 77 | 5 | 550 | -Minerals concentrate | ||
| 300 S-L | 560 | 468-2538 | 8-60 | 400-950 | 79 | 5 | 653 | -Lime grinding | |
| 350 S-L | 560 | 650-2800 | 10-59 | 400-840 | 81 | 5 | 736 | -FGD waste water | |
| 400 ST-L | 560 | 720-3312 | 7-51 | 300-700 | 80 | 5 | 825 | -Flotation | |
| 450 ST-L | 560 | 1008-4356 | 9-48 | 300-600 | 80 | 5 | 933 | -Process chemical | |
| 550 TU-L | 1200 | 1980-7900 | 10-50 | 250-475 | 86 | 5 | 1213 | -Pulp and paper | |
Selection & Performance Chart
