Solid Bowl Horizontal Sludge Decanter Centrifug Dewatering 3000r/min

Solid Bowl Decanter Centrifuge , Horizontal Sludge Decanter Centrifug Dewatering
 
 
Product Description:
 
 
Horizontal spiral centrifuge is one of our company main products. According to the requirement of the material used, we design the horizontal spiral centrifuge with one motor, two motors driving. At the same time, we design two motors separately on both sides of the machine and motors on the same place of the machine. We also develop three column horizontal spiral centrifuge, used in the separation of coal tar oil, water, slag in the industry, in petrochemical in the separation of oil, water, slag.
 
Main motor drive at full speed rotating drum, material put into spiral continuously by feed tube, evenly distributed to the spiral discharging port. Under centrifugal force, solid content settles to the drum wall and is pushed out cone drum slag notch by the spiral pusher. Liquid is overflow along the spiral to the drum big end. It form big end set out liquid and small end set out solid.
 
 
 
Tenchical parameters:
 

 
 
 
working principle:
 
Basic principle of horizontalscroll discharge centrifuges (namely decanter centrifuges): the light liquid,
 
heavy liquid and solid (dregs) in the mixed liquid (suspension) have different densities and are immiscible,
 
and any two or three phases therein are then under different centrifugal forces in the centrifugal force field,
 
resulting in different settling velocities, then achieving thepurpose of separation, layering or settling the
 
solid-phase particles in the liquid.
 
After entering into the high-speed turning drum,the solid-phase particles in the mixed liquid run and settle
 
on the drum wallunder the action of greatest centrifugal force; the light liquid settles at the innermost
 
place of the drum under minimum centrifugal force; and the heavy liquid settles in the middle (this phase
 
exists in case of three-phase separation or does not exists in case of two phases); same as the drum’s
 
turning direction, a screw feeder also turns at a high speed, and a constant speed difference is generated
 
by the differential mechanism; the solid-phase particles settled on the drum wall are then fed by the screw
 
feeder to the solid outletof the drum, and the light phase and heavy phase (this phase exists in case of
 
three-phase separation or does not exists in case of two phases) are then separated out of different outlets.
 
When used for two-phase separation, the machine is called two-phase decanter centrifuge (also called
 
horizontal scroll centrifuge), and the machine used for three-phase separation is called three-phase
 
decanter centrifuge. In our decanter centrifuges, the light liquid is exhausted by gravity force, and the heavy
 
liquid is discharged by the centrifugal force
 
 
Main parts :
 

 
 
Application:
 
 
Currently, our three-phase decanter centrifuges are used in the separation of olive oil ,  soybean oil , oils,
 
water and slags / dregs in the coal tar industry, the petrochemical industry, the fish powder industry, the swill
 
oil industry, the electrolytic copper industry, and the waste scraps in the slaughter houses.