|
[China]
Trade Verify
Address: No.343, SIMO Road, FengQuan District, XinXiang City, HeNan Province, China
Contact name:Kevin Sun
Xinxiang SIMO Blower Co., Ltd. |
|
Verified Suppliers
|
|
|
Backward Curved Materials Drying High Pressure Centrifugal Blower Fan
Introduction
The Backward Curved Materials Drying High Pressure Centrifugal Blower Fan is designed to work in the high efficiency area to achieve energy saving when operating under variable operating conditions.
It is jointly designed by the fan energy-saving group of the Ministry of Machinery Industry and organized by the national fan industry.
It’s a high-performance product promoted by the State Economic Commission and the Ministry of Machinery Industry.
Backward Curved Materials Drying High Pressure Centrifugal Blower Fan has the advantages of high efficiency, low noise, wide performance and high efficiency curve.
Applicable to industrial boilers of 5 ~ 35 tons/hour, the similar intake conditions and performance can be adapted, but the maximum temperature should not exceed 250 °C.
The dust removal device with a dust removal efficiency of not less than 85% must be installed before the induced draft fan, in order to reduce the dust content of the flue gas entering the fan, which not only reduces the pollution of the flue gas to the environment, but also reduces the wear of the dust on the fan. It’s conducive to extending the life of the fan.
Technical data
| Centrifugal Fan series | Centrifugal Fan model | Rotation Speed (r/min) | Total Pressure (Pa) | Air Capacity (m³/h) | Power (kW) |
|---|---|---|---|---|---|
| 8-12 | 4D | 2900 | 1942～2108 | 3242～6869 | 5.5～7.5 |
| 4.5D | 2900 | 2462～2805 | 4616～9781 | 7.5～11 | |
| 5D | 2900 | 3030～3375 | 6333～13417 | 15～22 | |
| 5.6D | 2900 | 3805～4227 | 8897～18847 | 30～37 | |
| 6.3D | 1450 | 1206～1373 | 6334～13419 | 5.5～7.5 | |
| 7.1D | 1450 | 1530～1746 | 9066～19208 | 11～15 | |
| 8D | 1450 | 1942～2216 | 12969～25059 | 18.5～30 | |
| 9D | 1450 | 2462～2805 | 18466～39122 | 37～45 | |
| 10D | 1450 | 3030～3462 | 25330～53666 | 55～75 | |
| 11.2D | 960～1450 | 1667～4345 | 23561～75397 | 45～132 | |
| 12.5D | 730～960 | 1206～2305 | 24907～69396 | 22～75 | |
| 14D | 730～960 | 1510～2972 | 34993～97496 | 37～132 | |
| 16D | 730～960 | 1971～3884 | 52234～145533 | 75～250 | |
| 4D | 2900 | 1755～2010 | 3242～6869 | 4～5.5 | |
| 4.5D | 2900 | 2413～2530 | 4616～6338 | 7.5 |
Advantages and Features
1. It is capable of outputting higher gas pressures and providing more gas flow with lower noise.
2. In the case of common base, the installation is very simple and requires little support from a professional technician.
3. The motor shaft is elastically connected with the drive shaft, and it is not necessary to constantly tighten the belt or replace the belt, and the maintenance workload is small.
