|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Fast Installation Glass Fused Steel Tank With Double Membrane Roof
Glass fused steel tank is used as various storage tank, digester, reactor in waste to energy and environmental industry especially water plant, waste water treatment plants, fire protection system, anaerobic / aerobic digestion, biogas plant, sewage and effluent treatment , water storage system , ect.
Glass fused steel tank with double membrane roof is specially used in biogas generating process , where the organic waste is digester in the tank which biogas is generated , the double membrane roof is a gas holder to collect biogas . This facility is common to know as anaerobic reactor such as UASB, CSTR, USR, MBR, ect.
Glass fused steel tank advantages
1. superior performance in corrosion resistance and against rust |
2. factory fabrication tank . No painting or spray on erection site |
3. minimal maintenance cost |
4. No need crane or other large equipment during erection. |
5. not subjected to severe weather and environment |
6. can be designed to future expansion, dismantle or re-movement. |
7. free service for technical drawings |
8. turn key service from proposal to tank commissioning |
Brief introduction of glass fused steel tank
Glass fused steel tank is a kind of factory fabrication tank made of glass coated on Ti-rich special steel plates. The steel plates are coated with enamel powder and burned in oven which makes them superior connection with both .
High recommended, we would cut holes on tank body in the workshop
instead of on job site . And along with flange nozzles according to
hole.
Glass fused steel tank is usually installed by jacks from top to
down . First, assembly the top ring, then lift them up by the jacks
; then assembly the next ring .... till the bottom ring .
Glass fused steel tank is wide used in water supply and water
treatment , power and energy, waste water treatment, and dry bulk
storage field .
Glass fused steel tank specifications
Coating color | dark blue, dark green , white, and customized |
A standard steel plate size | effective size 2400mm x 1200 m |
Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
Coating thickness | 0.25mm - 0.4mm, two coating internal and external |
Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
Adhesion | 3,450N/cm |
Elastic | same as steel sheet , around 500KN/mm |
Hardness | 6.0 Mohs |
Service life | >30 years |
Spark test | >1500 V |
Permeability | gas and liquid impermeable |
Easy yo clean | smooth, glossy, inert, anti-adhesion |
Corrosion resistance | excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
Technology advantages :
Glass fused steel tank roof options
Glass fused steel material roof
* gas - tight
* accommodate heavy loads from mixers and other equipment installed on roof
* gas and liquid impermeable
Aluminum sloped deck roof
* no gas - tight
* water treatment and waste water treatment
* economical
Glass reinforced polyester roof
* no gas - tight
* water treatment and waste water treatment
* economical
* dome shape roof
Single/double membrane roof
* tank mounted
* gas / liquid impermeable
* suits for low to moderate gas pressure
* center support pole is usually needed
Aluminum geodesic dome roof
* gas - tight
* suits for moderate pressure and vacuum design
* light load conditions
* roof is lightweight
* free - span
