SONY FCB-EX1000P CCD Colour Camera Module

SPECIFICATIONS:
* Image Sensor: 1/4 type EXview HAD CCD
* Number of Total Pixels: Approx. 380,000 pixels (NTSC), 440,000 pixels (PAL)
* Lens: 36x optical zoom, f=3.4 mm (wide) to 122.4 mm (tele), F1.6 to F4.5
* Digital Zoom: 12x (432x with optical zoom)
* Angle of View (H): 57.8 degree (wide end) to 1.7 degree (tele end)
* Min. Working Distance: 1.5 m at tele end
* Electronic Shutter: 1/1 to 1/10,000 s, 22 steps
* S/N Ratio: More than 50 dB
* Sync. System: Internal / External (V-lock)
* Min. Illumination: 1/60 s mode: 1.4 lux typical (F1.6, 50 IRE) / 1/4 s mode: 0.1 lux typical (F1.6, 50 IRE)
* White Balance: Auto, ATW, Indoor, Outdoor, One Push, Manual
* Gain: Auto / Manual (-3 to 28 dB, 2dB steps)
* AE Control: Auto, Manual, Priority Mode, Bright, EV compensation, Backlight compensation, Slow AE
* EV Compensation: -10.5 to 10.5 dB (1.5 dB steps)
* Backlight Compensation: On / Off
* Focusing System: Auto (Sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom trigger AF
* Privacy Zone Masking: On/Off (24 positions)
* Flicker Cancel: Auto
* Picture Effects: E-Flip, Nega Art, Black & White, Mirror Image
* Camera Operation Switch: Zoom tele, Zoom wide
* Video Output: VBS: 1.0 Vp-p (sync negative), Y/C
* Camera control interface: VISCA (TTL signal level), baud rate: 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s, 1 or 2 Stop bit selectable
* Storage Temperature: -20° C to 60° C (-4° to 140° F)
* Operating Temperature: 0°C to 50°C (32° to 122° F)
* Power Consumption: 6.0 V to 12.0 V DC / 1.6 W (motors inactive), 4.0 W (motors active)
* Dimensions (W x H x D): 50.0 x 57.5 x 87.9 mm
* Mass: Approx. 230 g

HIGHLIGHTS:
* 1/4 type EXview HAD CCD
* Minimum Sensitivity of 1.4 lux (50 IRE)
* 432x optical zoom (36x zoom / 12x optical)
* High Performance Digital Signal Processor (DSP)
* Auto ICR (IR Cut filter Removal) Mode
* Electronic Shutter/Slow Shutter
* Alarm Function
* Picture Freeze Function
* Electronic-Flip (E:Flip)
* High-speed serial communication (max. 38.4 kbps) and TTL signal-level control (VISCA™ protocol)
* Programmable factory preset
* Various customizable settings
* Key switch control compatibility
* VBS and Y/C video output
* Spot AE
* Internal/External sync