Anping Jiongcan Hardware Mesh Products Co., Ltd |
|
Hot dip galvanized steel grid plate, also known as hot dip
galvanized steel grid plate, is made of low carbon steel flat steel
and twisted square steel horizontal and longitudinal welding grid
building materials.
Hot dip galvanized steel grid has strong impact resistance, strong
heavy load capacity, elegant and beautiful.
Hot dip galvanized steel grid plate, also known as hot dip
galvanized steel grid plate, is made of low carbon steel flat steel
and twisted square steel horizontal and longitudinal welding grid
building materials.
Hot dip galvanized steel grid has strong impact resistance, strong
heavy load capacity, elegant and beautiful, in the municipal
roadbed and steel platform construction engineering has a superior
performance.
The cost performance, is the hot dip galvanized steel grid for the
old and new roadbed paving ditch road construction project.
The surface of hot-dip galvanizing steel grating is treated with
special hot-dip galvanizing, and its chemical and physical
properties are stable, and it is not easy to be corroded and
oxidized by air and microorganisms.
It can obviously enhance the trench load force.
Prevent collapse.
Hot dip galvanized steel grates with flat steel spacing of 3 cm
have a large impact resistance and a large span range.
The longer its service life is, it is generally within the range of
40-50 years.
Hot dip galvanized steel grid is a good steel frame structure and
load-bearing platform if there is no thought of the involvement of
failure factors.
Hot Dip Galvanized Steel Grating Specifications
material | Steel,Low carbon steel,stainless steel&
Q235,A36,SS304,SS316L,S235JR |
Surface treatment | Black, hot dipped galvanized, paint |
Bearing bar width*thickness | 25x3,25x4,30x3,30x4,30x5,32x5,40x5,50x5,.....75x10mm |
Bearing bar pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 34.3, 35, 40, 41, 60mm.
US standard: 1"x3/16", 1 1/4"x3/16", 1 1/2"x3/16", 1"x 1/4", 1
1/4"x 1/4", 1 1/2"x 1/4" etc. |
Bearing bar shape | Plain Style Steel Grating, Serrated Style Steel Grating and I Bar
Type Steel Grating. |
standard | China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88), UK:
BS4592-1987, Australia: AS1657-1985, Japan: JJS. |
Cross bar shape | round,twisted,bar shape |
Cross bar pitch | 38,50,76,100,101.6mm |
Galvanizing standard | US: ASTM (A123), CN: GB/T13912, UK: BS729 |
Market distribution | America45%,Europe26%,Middle east38%,Other place27% |
Hot dip galvanized grille plate series :(distance 40mm) grille
plate.
Steel grid plate is economical and light, in line with the British
standard of fixed channels, corridors and stairs, in the context of
small span, this is the ideal product, even in the transport
equipment corridor that load is no exception, but also can be used
to do warehouse shelves, pavilion panels, trestle, protective
fence, sun curtain, etc..
Grille plate series :(distance 60mm) grille plate.
Hot-dip galvanized steel grating is a kind developed especially for
the use of mining industry. It solves the problem of mineral
deposits sputtering on the plate surface.
This series of grille plates.
The steel grid plate has a nominal scale of 50*60mm through,
allowing most of the sputtering material to wear, so that the
surface of the clean and safe, this product is often used in the
crushing system of the board, the conveyor line of the aisle and
ball mills, processing plants and transfer stations.
Hot Dip Galvanized Steel Grating Application
Applicable to alloy, building materials, power stations, boilers,
shipbuilding, petrochemical, chemical and general factory houses,
municipal construction and other industries, with ventilation and
light, anti-skid, strong bearing capacity, beautiful and durable,
easy to clean, installation, is a new generation of building
products.
It can be used for all kinds of platforms in factories, workshops,
mining industries and ports. It can be used for welding kick plate
(side plate), pattern plate guard plate and connecting pieces and
other accessories around.
Flat steel with different specifications can be used to pack the
edge, or Angle steel, channel steel, square pipe, etc.
Handles and hinges can also be installed on steel grids that need
to be moved or opened frequently.
Hot Dip Galvanized Steel Grating Advantages
1, flat type: flat steel grille plate is the most widely used steel grille plate, mainly used for platforms, walkways, all kinds of trench cover, step plate and so on.
2, tooth type: compared with the flat steel grille plate, tooth steel grille plate has better anti-skid effect.
3, I-shaped: compared with the flat steel grille plate, I-shaped
steel grille plate has the characteristics of light weight and more
economy without greatly reducing the load capacity.
Hot Dip Galvanized Steel Grating Process:
Steel plate process with manual welding process and welding machine
process, surface treatment of hot dip galvanizing and painting, the
composition of ordinary steel plate is made of flat steel and twist
steel welded together, is composed of flat steel welded with
special specifications, steel grid plate can be divided into common
flat steel and sawtooth toothed plates, serrated flat non-slip
effect is more outstanding.
Hot Dip Galvanized Steel Grating Installation Method
Hot-dip galvanized steel grid plate can be installed in two ways:
welding and clamping.
The advantages of welding are permanent fixation, not loosening,
specific position in the first flat steel at each corner of the
steel grid plate, the length of the weld is not less than 20mm, the
height is not less than 3mm of fillet welding.
The advantages of the mounting clip are that it does not destroy
the hot dipping zinc layer and it is easy to disassemble. Each
plate needs at least 4 sets of mounting clips. The number of
mounting clips increases with the increase of the length of the
plate.
The safest method is to weld the screw head directly to the beam
without clamping down, so that the steel grille plate will not slip
from the beam due to the loosening of the clamping.