Cast Iron Engine Cylinder Sleeves DB58 Cylinder Liner For Doosan Engine

Cast Iron Engine Cylinder Sleeves DB58 Cylinder Liner For Doosan Engine

OKJ Parts DB58 Cylinder Liner for Doosan Engine Agriculture Diesel Engine Spare Parts

Poor fuel combustion

Fuel injection pressure is too low, the injector drops oil, fuel injection atomization and oil supply time is too late will cause fuel combustion and lead to cylinder knocking. The sound that this kind of fault causes to knock cylinder is low, hoarse and accompanying engine overheat, black smoke or vent pipe blast, exhaling phenomenon. The injector shall be removed for inspection and adjustment, and the oil supply time shall be adjusted. If necessary, a new part shall be replaced to meet the requirements.

Oil outlet valve is worn

After the oil valve is worn, on the one hand, the clearance between the relief ring and the inner hole of the valve seat becomes larger, the tightness becomes worse and the relief effect becomes worse. On the other hand, the residual pressure in the high-pressure tubing is too high, which increases the oil supply, causing fuel deflation and knocking on the cylinder.

Product Description

 

 
 Common problems

Troubleshooting of cylinder cushion

Cylinder engine pad is a common fault. Impact cylinder pad can take many common forms of abnormal sound. Because the cylinder cushion is washed away to different degrees, the resulting abnormal sound is different. Red -120 based on three different sets of pulse type bulldozer engine cylinder pad fault, show troubleshooting method.

One of the cold start bulldozer "when, when" good sheng gongs and drums, the first out of a white smoke emissions, after smoking, the engine suddenly caught fire, suddenly throttle when there is a knock sound, throttle stability abnormal sound disappeared, if repeatedly suddenly throttle, still knock on the door. Close the tank to check, they found abnormal noise in the VI cylinder. Suspect the injector needle is eye-catching. Delete the normal check results.

The sixth cylinder head was removed, we found that the cylinder pad burned smoke, the cylinder head bolts were originally tight (torque up to 250N · m) phenomenon, while the cylinder head and cylinder pad were not compressed because there was a water block higher than the upper body flat. Replace the cylinder pad and just get off the plane, re-noise after losing the mounting height of the block, and the engine runs normally.

Our Advantages

1. Samples are welcome for production.

2. Enough stocks for sale.

3. Standard packing or according to your specification requests

4. Technical experts take in charge of making drawing for the sample offered by clients.

5. Experience in engine parts for over 15 years and served customers all around the world.

FAQ

Q: Can we print our company logo on product and package?

A: Yes, but the quantity of the order is required. And we need you to offer the Trademark Authorization to us.

Q: How can we get our goods?

A: 1. For samples, can be: Fedex, DHL, UPS, EMS

     2. For formal orders, can be: By air, by sea, by train

Q: What is your MOQ?

A: We do not have MOQ . We accept lower quantity for your trial order.

Our Product Range