Gear Reducer 1.5 A Nema 17 Stepper Motor 1.8 Deg 500mN.M Holding Torque 42*40mm

Gear Reducer 1.5 A Nema 17 Stepper Motor 1.8 Deg 500mN.M Holding Torque 42*40mm

Nema 17 Gear Reducer Stepper Motor, 42x42x40mm, 1.8 Degree 2 Phase, 500mN.m. Holding Torque

The 42mm deceleration stepper motor combines the characteristics of stepper motors and reducers, enabling precise positioning control and being suitable for applications that require high-precision positioning.

Open-loop control eliminates the need for position feedback, thereby reducing power consumption.

Features:

• Bipolar or unipolar versions available

• We offer custom services and accept contract manufacturing. Wanted dealers! !

• Available in single or double shaft versions

• Professional drivetrain solution specialist

• Customizations on request

Motor Specifications

Operating Specifications

Motor

Step Angle: 1.8°

Maximum  Temperature :80°C maximum

Ambient Temperature: -20 °C to 50°C

Storage Temperature -20: °C to 100°C

Humidity Range (%) :85% or less, non-condensing

Magnet Wire Insulation :Class B 130 deg C

Insulation Resistance :100M Ohm at 500 VDC

Dielectric Strength :500 VDC for 1 min

Gear Box

Housing Material:Metal
Bearing at Output:Ball Bearings
Max.Radial Load(12mm from flange):≤80N
Max.Shaft Axial Load:≤30N
Radial Play of Shaft (near to Flange):≤0.06mm
Axial Play of Shaft:≤0.3mm
Backlash at No-load:1.5°

Torque Curves 

Submodels

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.

Options:
            Encoder          |               Brake           |              Gearbox            |           Shaft

Please click the "Get  a quote" button below to tell us your requirements.