Flanged Cast Steel Gate Valve ASTM A216 WCB With Rising Stem RS 150LB

Flanged Cast Carbon Steel Sluice Valve A 216 WCB Gate Valve with Rising Stem RS 150LB

A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid.

Standards

Design and Manufacture: Cast steel gate valve to API 600 or API 6D;

Inspection and Test: API 598, API 600 or API 6D.

End flange dimension: ASME B16.5 (for NPS≤24)

Face to face and end to end: ASME B16.10.

Pressure-temperature ratings: ASME B16.34.

Quick Details:

1. Type: Flanged Gate Valves
2. OS&Y, Bolted Bonnet, Solid or Flexible Wedge Design
3. Size Range: 2" to 48"
4. Pressure Ratings: Ansi Class 150 / 150#
5. Materials Available in: Cast Steel A216 WCB
6. Various trim materials are available to suit different service conditions
7. Actuator: Manual, Handwheel
8. NACE MR 0175 on request

Features:

1. Bonnet Gasket Style

Stainless steel + flexible graphite combined gasket is used for Class 150 gate valve;

2. Packing Seal

As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requosted by the customer.

3. Body and Bonnet Connection

Class 150LB gate valves are usually connected with bolted bonnet design.

4. Disc Design
NPS≥2 Gate valves are flexible wedge gate.

5. Seat

For carbon steel gate valve, the seat is usually forged steel. The seat sealing surface is overlaying welded with hard alloy specified by the customer. For Stainless steel gate valve, the seat is integral with body, or it can be machined directly after hard alloy welded.

6. Backseat Design

All gate valves have backseat design. In most cases,the carbon steel gate valve is fitted with a renewable back seat. For stainless steel gate valve, the back seat is machined directly in the bonnet or be machined after welding.

7. Stem Design

The stem is integral forged design. The minimum diameter of the stem shall be as per the standard requirement.

8 .Stem Nut

Usually, the stem nut is made of ASTM A439 D2. It is also can be made of copper alloy or other materials if being requested by the customer.

9. Operation

Hand wheel or bevel gear box is usually used for gate valve operation.

Description:

1. Flanged Cast Steel Gate Valve Parts and Material List for Class 150LB:

2. Main Connection Dimensions: