Active Member
|
[China]
Address: Dacheng Industrial Park No.1,Shenyang Road,High Tech Development Zone,Cangzhou City, Hebei Province, China.
Contact name:Ms.Alisa
Cangzhou Cencho Tech Solution Co.,Ltd |
|
|
Stainless Steel Lockable Casting 1000wog Casting Ball Valve
1. This 2PC casting ball valve is 1inch 1000wog, material is stainless stee 304 / 316,and with look.
2. Stainless steel 2PC casting ball valve and flange gate valve belong to the same type of valve.
3. 2PC casting ball valve is mainly used to cut off, distribute and change the flow direction of medium in pipeline.
4. 2PC casting ball valve and 3PC casting ball valve are widely used in recent years.
5. The working principle of stainless steel 2PC casting ball valve is to make the valve unblocked or blocked by rotating the casting ball valve.
Three advantages of stainless steel 2PC casting ball valve:
1. Stainless steel 2PC casting ball valve is easy to operate, open and close quickly, from full open to full close as long as 90 ° rotation, easy to remote control.
2. The fluid resistance is small, and its resistance coefficient is equal to that of the same length of pipe.
3. Stainless steel 2PC casting ball valve is tight and reliable. It has two sealing surfaces. At present, all kinds of plastics are widely used in the sealing surface material of 2PC casting ball valve, which has good sealing performance and can realize complete sealing. It has been widely used in vacuum system.
Dimension Table
| SIZE | Φ d | L | H | W | N.M | KGS | |
| DN6 | 1/4” | 12.5 | 50 | 48 | 106 | 4 | 0.19 |
| DN10 | 3/8” | 12.5 | 50 | 48 | 106 | 4 | 0.19 |
| DN15 | 1/2” | 15 | 56 | 52 | 106 | 5 | 0.28 |
| DN20 | 3/4” | 20 | 65 | 57 | 115 | 8 | 0.40 |
| DN25 | 1” | 25 | 80 | 73 | 148 | 10 | 0.67 |
| DN32 | 1-1/4” | 32 | 90 | 79 | 148 | 14 | 1.00 |
| DN40 | 1-1/2” | 38 | 99 | 84 | 183 | 24 | 1.25 |
| DN50 | 2” | 50 | 122 | 97 | 183 | 40 | 2.08 |
| DN65 | 2-1/2” | 65 | 147 | 127 | 251 | 48 | 3.84 |
| DN80 | 3” | 76 | 172 | 136 | 251 | 80 | 5.70 |
| DN100 | 4” | 94 | 222 | 158 | 283 | 103 | 10.70 |
Drawing
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Is the price of your products lower than others?
A: We can not promise you the lowest price,because the best quality
is what we pursue firstly.
Q: What's the payment term?
A: We accept T/T, western union, L/C and Trade Assurance. For bulk
order by T/T and Western Union, we will require 30% deposit
first and 70% balance before delivery.
Q: What's the lead time?
A: It will be 1-5 days for sample and 2-12 days for bulk order, it
depends on your required.
