|
[China]
Trade Verify
Address: Xiaowu 1st Industrial Area, Xiaowu Village, Dongchong Town, Nansha, Guangzhou, China
Contact name:Johnson
Guangzhou HS Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Printer Slotter Die Cutter Machine Flexo Printing Slotting Machine
Model:jumbo1800x3600
Introduction
It adopts vacuum adsorption, leading edge feeding, design and manufacture, and the whole operation is humanized design, which can be set, modified, executed, replaced, memorized and displayed accurately in a short time.
2. The material of the aluminum drive roller is made of high-quality steel, with balance correction, smooth operation, surface grinding, and hard chrome plating.
3. Full gear transmission, high-quality alloy steel, heat-treated and ground.
4. Automatic oil balance device to keep the oil balance of each unit.
5. With automatic zeroing, recording memory, printing plate cleaning memory, order dust removal and other functions, optional touch screen PLC control, easy to operate.
6. Anilox roller: Metal or ceramic anilox roller can be used, and the anilox roller line can be selected according to user requirements.
Independent Lead Edge Feeder
| Item | Descriptions |
1. Lead Edge Feeding system | 1. Vacuum transfer lead edge feeder. 2. Back buffle and side buffle are all motorized adjustment. 3. Feeder sliding block is of aluminum structure to guarantee a more stable working with less vibration. 4. Sheet counting in touch screen. 5. Skip feeding for bigger sheet. 7. Pneumatic lift device with end chain-lock switch for convenient operation. |
| 2. Machine open/cloe | 1 .Button auto control for machine open/close with alarm device to safeguard operators. 2. Pneumatic locking system, whole machine locked on fixed track by feeder main pneumatic cylinder. |
| 3. Feeding roll | 1. Endurable rubber-coated feeding roll to add use life. |
| 4. Zero return device | 1. Computer adopts zero return device with memory function to guarantee the same adjustment standard, auto adjustment of correct position to reduce the waste of boards. |
Features of printing units
Printing unit:
The phase is 360 degree adjusted by electric planet gears.
Drum type rubber roller ensures the quality of the ink
distributing.
Pneumatic circular ink supply system.
Ceramic anilox roller can be chosen.
Satisfy the printing plate bundle of board, apply to bundle of
standard plate strips.
Features of slotting unit
| Item | Features |
| 1. Slotting phase adjustment | 1. High precision inverter to adjust the speed, 360 degree adjustment, quick time. 2. Phase zero positioning device to guarantee slotting position sameness. |
| 2. Creasing wheel | 1. Manual/motorized adjustment of creasing wheel and slotting knife head position through precise screw pole. 2. Creasing wheel down shaft, slotting knife down shaft adopt offset ring, close structure for precise positioning. |
| 3. Slitting and slotting knife head | 1. Blade thickness:7mm. Imported high quality alloyed moon-shaped saw slotting blades, high hardness, high endurability, high grindability. 2. Grinded and hard-chromed slotting shaft for stable running. 3. Manual adjustment of slotting knife head, creasing wheel and slitting knife head. 4. Auto detection device of slotting shaft circumferential position, auto record of the position and guarantee the position auto return. 5. Pre-creaser fixed before slotter. 6. Front knife and back knife seated on one shaft. |
Features for Rotary Die Cutting Unit
| Item | Features |
1. Die cutting mould cylinder( Down cylinder) | 1. Die cutting cylinder is made by high quality steel, fine grinding, hard chromed. 2. Balance treatment to increase stable running. 3. Die cutting mould fixation screws M10, hole distance at 100mm at transversal direction and 18 equal units at circumferential direction. 4. Die cutting wooden mould thickness 13-15mm(five ply), 16-18mm(three ply). |
2. Rubber mat cylinder(Down cylinder) | 1. Mat cylinder uses high quality steel, grinding, hard chromed. 2. Balance treatment for stable running. 3. Rubber mat thickness 8mm, width 250mm. 4. Rubber mat cylinder mechanical rotary direction change 40mm distance movement structure, movement speed same as the machine running speed. 5. Manual adjustment of die cutting mould gap, adjustment range: 0-16mm. |
| 3. Phase adjustment device | 1. Satellite gearwheel structure 2. PLC and encoder control of die cutting phase adjustment for start and stop adjustment. |
FAQ
1. Q:What is the machine warranty?
A: one year.
2. Q:What is the production time while placing order?
A: About 20 days
3. Q:What is the delivery time?
A: 40-60 days after get the deposit.
