Active Member
|
[China]
Address: No. 307-310 Shishan Industrial Zone, Guangming New Zone, Shenzhen
Contact name:Scarlett
Shenzhen Bangrong Automotive Supplies Co.,Ltd. |
|
|
| Product Name | Features |
| 2K Color Tinters | Fast Drying, High Hardness, High Gloss, Bright Color, Excellent Covering Power, Easy Spraying |
| 1K Color Tinters | Excellent Covering Power, Metallic Effect, Easy Spraying |
| Clear Coat | High Hardness, High Gross, Resistance To Alcohol And Gasoline, Protection, Durability And Brightness |
| Thinner | Good Dissolution, Promote Bonding |
| Hardener | High Quality, Excellent Anti-Yellowish, Heat Resistance, High Solid Content |
| 1K Primer | Fast Drying, Easy sanding, Excellent Filling Power, Good Adhesion(To The Top Coat) |
| 2K Primer | High Filling Power, Excellent Inter-Layer Adhesion, Fast Drying, Easy Sanding, Improve The Fullness, Brightness And Gloss(Of The Top Coat) |
| Epoxy Primer | Excellent Adhesion, Resistance Salt Spray, Resistant Moist Heat, Anti Moisture, Anti Bubbling, Excellent Isolation |
| 2K Binder | Improve The Gloss, Help Leveling |
| 1K Binder | Accelerate(The 1K Metallic Paint Film) Drying Speed, Improve The Application, Improve Adhesion |
| Matte Black Primer | High Blackness, Fast Drying, Good Adhesion |
| Matte Agent | Reduce Brightness, Good Matting Effect |
| Poly Putty | Good Filling Power, Easy Application, Fast Dry (In Normal Temperature), No Crack, No Collapse, Easy Sanding, Excellent Adhesion |
SURFACE PREPARATION:
1, Surface Should Be Clean And Free Of Dust, Grease And Oil.
2, Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
Temperature& mixed | Temperature | Clear Coat | Activator/ Hardener | Thinner |
Temperature& mixed | <15ºC | BS/ES Clear Coat | BS/ES Fast Dry Activator | BS/ES Fast Dry Thinner |
Temperature& mixed | 15-25ºC | BS/ES Clear Coat | BS/ES Standard Activator | BS/ES Standard Thinner |
Temperature& mixed | 25-35ºC | BS/ES Clear Coat | BS/ES Slow Dry Activator | BS/ES Slow Dry Thinner |
Mixing Ratio |
| 2 | 1 | 0.3-0.5 |
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suction Spray Gun)
-Spraying Pressure: 3-4 Bar.
-Spraying Viscosity: 13~18s(Ford Cup #4 At 20ºC)
-Number Of Coats: 3 Coats Maximum.
Drying Time | Temperature | Dust Free | Tack Free | Complete Dry |
Drying Time | 20ºC | 1h | 2-3 hours | 24h |
Drying Time | 60ºC | 5 minutes | 10 minutes | 60 minutes |
