|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
PVC dragon sheet,no-lamination print sheet,Non-laminated white inkjet sheet for PVC Card printing
1. PVC dragon sheet,no-lamination print sheet,Non-laminated white inkjet sheet for PVC Card printing- Introduction
Non-laminating inkjet PVC sheet (Dragon card sheet) is known as the most economic material solution for normal card production. There are three sheets in one set including 2 transparent printing sheets (sheet A) plus 1 middle white core sheet (sheet B).
2. PVC dragon sheet,no-lamination print sheet,Non-laminated white inkjet sheet for PVC Card printing- Product parameters:
| Sheet size | 200mmx300mm |
| Sheet thickness per set | T1) 0.15mm+0.46mm+0.15mm(A+B+A) T2) 0.15mm+0.60mm+0.15mm(A+B+A) T3) 0.25mm+0.46mm+0.25mm(A+B+A) A: transparent inkjet printing sheet B: white pvc core sheet |
3. PVC dragon sheet,no-lamination print sheet,Non-laminated white inkjet sheet for PVC Card printing- Application
The recommended card production procedures with dragon sheets are detailed as below:
1. Print the image on the two sheets A with inkjet printer
(remember to choose “mirror printing”) , wait and let the ink dry
up completely ( normally around 5-10 minutes )
2. Remove the protection films on the middle core sheet, put the
printed sheets right on both sides of the middle core sheet , then
let it go through the rolling laminator (set temperature around
130℃-160℃)
3. Cut the laminated sheet into standard card, remove the
protection film from the surface of the card .
4.PVC dragon sheet,no-lamination print sheet,Non-laminated white inkjet sheet for PVC Card printing- Package
