Active Member
|
[China]
Address: 3rd Floor, No.59 Building, Third Industry Zone, Xitian Community，Gongming Town, Guangming District, Shenzhen 518106 , China
Contact name:Eric Liu
ShenZhen Zeayeto Automotive Technology Co.,Limited |
|
|
1500 L/H±10% HHO Engine Carbon Cleaning Machine Internal System Clean Products
Why should do carbon cleaning for cars?
1. Cut costs
Under normal circumstances, the cost of repairing once is much higher than the maintenance
2. Efficient
Smoother operation and more efficient gas production, carbon removal in just 20 minutes
3. Environment Friendly
No medical component, no corrosion to auto parts, no any side effects, no generate hydrocarbons, carbon monoxide, or carbon dioxide.
Feature
1. One machine can serve for both petrol and diesel vehicles.
2. It can clean engine parts like intake, injector, DPF, spark plug, etc.
3. Improve cars' performance, increase 20% engine power and decrease 72% pollution.
3. Guarantee 100% safety for using the machine.(Automotive negative pressure alarm device)
4. After cleaning carbon, oil consumption, 70% of air pollution and engine noised can be reduced, and 20% of engine power improved.
5. HD touch screen can make carbon cleaning more convenient.
Compared with other suppliers, we have below advantages:
Easy operation : The operator panel is easy to understand. There are operational tips on the screen. Fresh man can do it easily.
Multiple security protection technologies ensure safe operation:
High-precision vibration sensor with flameout protection, vibration sensing device inside the machine, and emergency button settings.
If the engine stops unexpectedly during the decarbonizing process, the machine can automatically identify whether to continue to output the hho gas to prevent excessive gas from entering the cylinder and causing an explosion.
Compared with traditional methods
| Hho carbon cleaner | Chemicals drip carbon cleaner | Water based foam detachable | Traditional dismantle engine | |
| Carbon cleaning time | 20 minutes | 40 minutes | 40 minutes | About 2 to 4 hours |
| Environmental protection | Complete combustion, non-toxic and harmless exhaust | Toxic and harmful exhaust | Not easy to handle waste | Carbon particles, not easy to handle waste |
| Advantages and disadvantages | The engine can be idling | The engine is running at idle speed, and the medicament is continuously inhaled | The implementation process is cumbersome and the carbon is incomplete | Time wasting, destroying the original assembly, cleaning intuitive |
| Cost | Carbon cleaning process | Chemicals drip, engine oil, oil filters | Chemicals foam, engine oil, oil filters | Time of engine dismantling, chemical drip, engine oil, oil filters |
Working principle
1. HHO carbon cleaner machine produce hydrogen(H2) and oxygen(O2).
2. H2 and O2 will be sent into engine through vacuum pipe or air intake.
3. H2 will run into the surface of carbon deposits, and combine with carbon to form hydrocarbon.
4. Hydrogen will make combustion with O2, then carbon deposits will be removed.
5. HHO carbon cleaner agent enhance cleaning effect, protecting engine parts and extend the engine lifetime.
Operation steps:
1. Turn on the power and select the car displacement and operating mode.
2. Insert the gas outlet pipe of the machine into the car engine intake manifold (air filter or brake vacuum tube).
3. Start the vehicle and keep idling
4. Setting the time of cleaning carbon(up to types of vehicles, usually 20 min),then click the start button on the control panel.
5. When hearing the buzzing sound, the machine finished engine carbon cleaning.
6. Turn off the power of the machine, then turn off the vehicle, pull out the gas outlet pipe in the end.
7. Restore the car line.
8. Start the car, step on the throttle at a constant speed until the speed is at 3000-3500 rpm and then release it,and do it again after 3 seconds. This was repeated 6 times. Until the moisture and dirt in the exhaust pipe are discharged, the carbon removal is finished.
Our Support
Products of our company all passed CE, FCC and other certificates. All the production process have a professional person to test the machine and parts.
We guarantee 15 days refund, 1 year warranty, lifetime warranty ater-sales service.
For Personal
1. OEM & ODM Service
2. 24 Hours Online Service
3. Remote Technical Support
4. Technical Training Service
5. Operation Manual & Video Service
6. Visit Factory Service
For distributors
1. Do advertisement through: Google, Facebook, Twitter etc. Especially advertisement focus on your local city or country;
2. Professional website building;
3. Successful case: offer the successful business model, which is including the business way, business success video and etc;
4. Free advertising material, including catalogues, posters, poster display, even video design;
5. Technical training or supports for maintenance;
6. Maintenance machine offered freely.
