High Stiffness 100% 3K Carbon Fiber Pipe Chemical Resistant

High Strength - High Stiffness Chemical Resistant 100% 3K Carbon Fiber Pipe Tube

 
Carbon tubes (full name carbon fiber reinforced thermoplastic tubes) are the solution for challenges where lowest weight with highest strength and/or stiffness are required. Carbon fibers have grown in popularity for numerous applications over recent years. The perfect combination of strong and lightweight carbon fibers in a protective thermoplastic resin, is a solution that fits in a sustainable world. Not only because of the durability of this material but most importantly because the material can be reused and recycled.
 
Can I tap carbon fiber?
 
The results show, that the direct tapping into a carbon fibre reinforced polymer is possible. The two tested threads have both shown a good load capacity of averaged 4.42 kN for M5 and 6.56 kN for the M8 thread.
 
Can you rivet carbon fiber?
 
Riveting carbon fiber composites is quite problematic: You need to use expensive titanium fasteners because aluminium rivets would quickly corrode when in electrical contact to the electrochemically much nobler carbon fibers.
 
Can you drill a hole in carbon fiber?
 
The best bits for drilling carbon fiber are solid carbide or diamond. These bits are very brittle though and should only be used in a rigid setup like a drill press or mill. If you try to use these with a hand drill, even if you use drill bushings, they can easily shatter.
 
Is carbon fibre stronger than steel?
 
Strength. Though steel is generally considered the standard when it comes to construction and industrial settings, in terms of strength to weight ratios, carbon fiber is actually significantly stronger than steel.
 
How long can carbon fiber last?
 
It is estimated that a carbon fiber mountain bike will last for around 5 to 7 years. Carbon fiber bike frames used to be susceptible to UV damage, but this is no longer the case.
 

 
Our Service:
 
1. It ensures a year of quality assurance and 24 hours online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.
 
FAQ:
 
1. Can you produce according to the samples or drawings?
Yes, we can produce your samples or technical drawings. We can create the molds and fixtures.
 
2. What are your terms of payment?
Usually, we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, balance before shipment.
 
3. What is the lead time?
It usually takes 25 to 35 days after sample confirmation and receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
 
4. What are your terms of packing?
Generally, we pack our goods in neutral cartons. It is fragile we will make the wooden frame. and we also can according to your requirements.
 
5. What are your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost-effective for you.
 
6. How to solve the quality problems after sales?
Take photos of the problems and send them to us. We will make a satisfied solution for you within 24 hours after we confirm the problems.
 
7. Is it OK to print my logo on carbon fiber products?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 
8. You are a manufacturer or trading company?
We are a factory. Welcome to visit our factory at any time.