50mm ( 47mm ) Woven Finish Carbon Fiber Tube Strong Corrosion Resistance

Strong Corrosion Resistance 50mm (47mm) Woven Finish Carbon Fibre Tube

A 50mm Carbon Fiber Tube is a tube made of carbon fiber composite material, with a diameter of 50 millimeters (mm) and a length that varies depending on the application it is designed for.

Carbon Fiber Tubes are typically formed by wrapping continuous carbon fibers around a mandrel and then curing them with a resin. This manufacturing process creates a material that is light, strong, and stiff. They have a high strength-to-weight ratio and are commonly used in a variety of industries where weight reduction and strength are critical design factors.

50mm Carbon Fiber Tubes are commonly used in industrial applications, such as robotics and other machines that require lightweight but strong components. They are also used in the manufacturing of sporting goods such as fishing rods, golf shafts, and bicycle frames, as well as in aircraft and aerospace industries, where their high strength and stiffness are particularly useful.

The length of 50mm Carbon Fiber Tubes can vary, as they are often used in custom applications that require specific lengths. They typically come with different types of finishes, such as gloss or matte, and can be cut to their respective length using specialized tools.

We supply carbon fiber tubes and carbon fiber conical tubes in various of specifications and colors.

The main benefits of carbon fiber over typically used metal tubing are as follows:

• Light Weight(low density)
• High Strength
• High Stiffness
• Chemical Resistant
• Low Coefficient of Thermal Expansion
• Good Surface

LIJIN manufactures custom carbon fiber tubes and carbon fiber conical tubes to fit your strength, stiffness, and geometric requirements. Our products can be used as fishing poles, paddles, arrow shafts, alpenstocks, etc.

The regular color is black. And other colors are also available by special request. To get more information or have an inquiry, please feel free to contact us.

The first use of carbon fiber in high performance goes back to 1960-1970. It became popular very quickly in every technical area where lightness and strength were primary requirements.

Carbon fiber originates from thermal pyrolysis in a controlled oven where a material called precursor is strongly warmed up at a temperature of about 2000° C in an inert gas atmosphere to produce graphite.

Then other heat treatments modify the final properties of the fibers, for example warming up at temperatures lower than 2000°C gives you a more strength material, whereas with higher temperatures you'll get a more expensive carbon fiber but with a higher Elastic Modulus (Young's modulus).

This is why today there are many kinds of carbon fibers that, even if they're similar, leads to products with different prices and performances.

The carbon fibers previously obtained are lately drowned in epoxy resin (called the matrix) that acts as a binder, allowing the fibers to work together and to distribute the strain uniformly to each one of them.

As you can guess this matrix has a primary role and it has been studied and improved in the last years, like the nanocomposite fillers inside of it.