|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
OEM Service Carbide Wear Strips For Heavy Cutting Steel And Cast Steel
introduction of Carbide Wear Strips
carbide is an alloy material made from a hard compound of a refractory metal and a binder metal by a powder metallurgy process.
Cemented carbide has a series of excellent properties such as high
hardness, wear resistance, strength and toughness, heat resistance
and corrosion resistance, especially its high hardness and wear
resistance, which remains basically unchanged even at a temperature
of 500 ° C. It still has a high hardness at 1000 °C.
Carbide is widely used as a tool material, such as turning tools,
milling cutters, planers, drills, boring tools, etc., for cutting
cast iron, non-ferrous metals, plastics, chemical fiber, graphite,
glass, stone and ordinary steel, can also be used for cutting
Hard-to-machine materials such as heat-resistant steel, stainless
steel, high manganese steel, and tool steel.
| (T) | (W) | (L) |
| mm | mm | mm |
| 3~6 | 12 | 400 |
| 3~6 | 15 | 400 |
| 3~6 | 20 | 400 |
| 3~6 | 25 | 400 |
| 3~6 | 25 | 450 |
| 3~6 | 30 | 450 |
| 3~12 | 32 | 450 |
| 3~6 | 15 | 500 |
| 3~6 | 20 | 500 |
Cemented carbide has high hardness, strength, wear resistance and corrosion resistance. It is known as “industrial teeth” and is used in the manufacture of cutting tools, cutting tools, cobalt tools and wear parts. It is widely used in military and aerospace. In the fields of machining, metallurgy, oil drilling, mining tools, electronic communication, construction, etc., with the development of downstream industries, the demand for hard alloys is increasing. And the future of high-tech weaponry equipment manufacturing, advances in cutting-edge science and technology, and the rapid development of nuclear energy will greatly increase the demand for high-tech content and high-quality stability of cemented carbide products.
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool. |
Common specification sheet
| (T) | (W) | (L) |
| mm | mm | mm |
| 1~3 | 3.5 | 50~320 |
| 1~4 | 4 | 50~320 |
| 1~5 | 5 | 50~320 |
| 1~6 | 6 | 50~320 |
| 1~7 | 7 | 50~320 |
| 1~8 | 8 | 50~320 |
| 1~9 | 9 | 50~320 |
| 1~10 | 10 | 50~320 |
| 1~11 | 11 | 50~320 |
| 1~12 | 12 | 50~320 |
| 1~13 | 13 | 50~320 |
| 1~14 | 14 | 50~320 |
| 1~15 | 15 | 50~320 |
| 1~16 | 16 | 50~320 |
| 1~17 | 17 | 50~320 |
| 1~18 | 18 | 50~320 |
| 1~18 | 19 | 50~320 |
| 1~18 | 20 | 50~320 |
OEM/ODM
Rich Experience In OEM
We are in a position to accept orders against customers samples
specifying design, specifications
and packaging requirements.
Various kinds of Packing box are for your choose.
OEM Packing box with your logo is not a problem.
Production Line
We has a complete carbide production line,we are manufacturer, so we can control the goods quality
from raw material, production process, strictly quality inspection after finishing, also we have import
