|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Tungsten steel application areas:
It is widely used as a high-speed cutting tool, kiln structural material, jet engine parts, cermet materials, and resistance heating elements.
It is used to manufacture cutting tools, wear parts, smelting
crucibles of metals such as copper, cobalt and bismuth, and
wear-resistant semiconductor films. Used as super hard tool
material and wear resistant material. It forms a solid solution
with many carbides. WC-TiC-Co carbide tools have been widely used.
It can also be used as a modified additive for NbC-C and TaC-C
ternary system carbides, which can reduce the sintering temperature
while maintaining excellent performance and can be used as
aerospace materials.
The tungsten carbide (WC) powder was synthesized by using tungstic
anhydride (WO3) and graphite in a reducing atmosphere at a high
temperature of 1400 to 1600 °C. The dense ceramic product can be
obtained by hot press sintering or hot isostatic pressing.
Advantage:
1. Over 10 Years' efforts in making high quality K30 Wear Resistant carbide Sheet strips and strips, Almost 8 years in doing importing and exporting business.
2. Rich experience in grade researching, mould designing, automatic press, HIP sintered, surface treating and quality control.
3. We have many years of experience in producing the tungsten carbide strips and have gained a wide reputation in the market . Welcome your inquiry anytime .
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger jointing tool. |
